Table Of Contents
Route Filter Configuration
Finding a Route Filter
Adding a Route Filter
Updating a Route Filter
Copying a Route Filter
Route Filter Configuration Settings
Adding Route Filter Clauses
Removing Route Filter Clauses
Deleting a Route Filter
Route Filter Tag Descriptions
Route Filter Configuration
Route filters, along with route patterns, use dialed-digit strings to determine how a call is handled.
You can only use route filters with North American Numbering Plan (NANP) route patterns; that is, route patterns that use an at symbol (@) wildcard. Route filters allow you to determine which route patterns your users can dial; for example, whether your users can manually select a long-distance carrier (by dialing 101 plus a carrier access code).
Refer to "Understanding Route Plans" in the Cisco CallManager System Guide for more information.
Tips 
Always add and define the route filter first and then add the route filter to the route pattern.
Use the following topics to add, update, copy, or delete a route filter:
•Finding a Route Filter
•Adding a Route Filter
•Updating a Route Filter
•Copying a Route Filter
•Adding Route Filter Clauses
•Removing Route Filter Clauses
•Deleting a Route Filter
•Route Filter Tag Descriptions
•Route Filter Configuration Settings
Finding a Route Filter
Because you might have several route filters in your network, Cisco CallManager lets you locate specific route filters based on specific criteria. Use the following procedure to locate route filters.
Procedure
Step 1 Choose Route Plan > Route Filter.
The Find and List Route Filters window displays.
Step 2 From the drop-down list box, choose one of the following criteria:
•begins with
•contains
•ends with
•is exactly
Step 3 Specify the appropriate search text, if applicable and click Find. You can also specify how many items per page to display.
Note To find all route filters registered in the database, click Find without entering any search text.
A list of discovered route filters displays by:
•Route filter name
•Clause
Note You can delete multiple route filters from the Find and List Route Filters window by checking the check boxes next to the appropriate route filters and clicking Delete Selected. You can choose all of theroute filters on the window by checking the check box in the matching records title bar and clicking Delete Selected.
Step 4 Click the route filter from the list of records that matches your search criteria.
The window displays the route filter you choose.
Related Topics
•Adding a Route Filter
•Updating a Route Filter
•Copying a Route Filter
•Adding Route Filter Clauses
•Removing Route Filter Clauses
•Deleting a Route Filter
•Route Filter Tag Descriptions
•Route Filter Configuration Settings
Adding a Route Filter
The following procedure describes how to add a route filter.
Procedure
Step 1 Choose Route Plan > Route Filter in the menu bar.
Step 2 Click Add a New Route Filter.
Step 3 Enter the appropriate settings as described in Table 14-1.
Step 4 Click Continue.
Step 5 Choose the route filter tags and operators and enter data, where appropriate, to create a clause for this route filter.
Note For help with entering data for route filter tags and operators, see the "Route Filter Tag Descriptions" section.
Step 6 Click Insert to add the filter.
The message "Status: Insert completed" displays.
Related Topics
•Finding a Route Filter
•Updating a Route Filter
•Route Filter Tag Descriptions
•Understanding Route Plans, Cisco CallManager System Guide
Updating a Route Filter
The following procedure describes how to update a route filter.
Procedure
Step 1 Choose Route Plan > Route Filter in the menu bar.
Step 2 Locate the route filter you want to update. See the "Finding a Route Filter" section.
Step 3 In the Dial Plan drop-down list box, choose North American Numbering Plan.
Step 4 Update the appropriate settings as described in Table 14-1.
Step 5 Click Update.
Related Topics
•Finding a Route Filter
•Adding a Route Filter
•Adding Route Filter Clauses
•Copying a Route Filter
•Route Filter Tag Descriptions
•Route Filter Configuration Settings
•Understanding Route Plans, Cisco CallManager System Guide
Copying a Route Filter
The following procedure describes how to copy a route filter.
Procedure
Step 1 Choose Route Plan > Route Filter in the menu bar.
Step 2 Locate the route pattern you want to copy. See the "Finding a Route Filter" section.
Step 3 Check the check box next to the route filter you want to copy.
Step 4 Click the Copy icon of that route filter.
The window displays the copy of the route filter.
Step 5 In the Route Filter Name field, enter the name for this route filter.
Step 6 Update the appropriate settings as described in Table 14-1.
Note For help with entering data for route filter tags and operators, see the "Route Filter Tag Descriptions" section.
Step 7 Click Insert to add the new route filter.
Tips You can also copy a route filter by locating and displaying the route filter you want to copy and clicking Copy. Then, follow the instructions in Step 5 through Step 6.
Related Topics
•Finding a Route Filter
•Adding a Route Filter
•Adding Route Filter Clauses
•Removing Route Filter Clauses
•Route Filter Tag Descriptions
•Route Filter Configuration Settings
•Understanding Route Plans, Cisco CallManager System Guide
Route Filter Configuration Settings
Table 14-1 describes the route filter configuration settings.
Table 14-1 Route Filter Configuration Settings
Field
|
Description
|
Dial Plan
|
Choose North American Numbering Plan from the drop-down list.
|
Route Filter Name
|
Enter a name in the Route Filter Name field. The name can contain up to 50 alphanumeric characters and can contain any combination of spaces, periods (.), hyphens (-), and underscore characters (_). Ensure each route filter name is unique to the route plan.
Note Use concise and descriptive names for your route filters. The CompanynameLocationCalltype format usually provides a sufficient level of detail and is short enough to enable you to quickly and easily identify a route filter. For example, CiscoDallasMetro identifies a route filter for toll-free inter- local access and transport area (LATA) calls from the Cisco office in Dallas.
|
Related Topics
•Adding a Route Filter
•Updating a Route Filter
Adding Route Filter Clauses
Adding route filter clauses allows you to expand upon an existing route filter by incorporating additional operators and entries for existing tags using a logical OR. You can add route filter clauses either when initially adding a new route filter or when updating an existing route filter. This procedure describes adding a route filter clause to an existing route filter.
Procedure
Step 1 Choose Route Plan > Route Filter in the menu bar.
Step 2 Locate the route filter to which you want to add route filter clauses. See the "Finding a Route Filter" section.
Step 3 Click Add Clause to display a new route filter clause data entry window. All the operator fields for this new clause display NOT-SELECTED.
Step 4 Select the route filter tags and operators and enter data, where appropriate, to create an additional clause for this route filter.
Note For help with entering data for route filter tags and operators, see the "Route Filter Tag Descriptions" section.
Step 5 Click Insert to add the clause.
The message "Status: Insert completed" displays. The new clause displays below the existing clauses on the window. (Scroll down, if necessary, to view the new information.)
Related Topics
•Finding a Route Filter
•Adding a Route Filter
•Removing Route Filter Clauses
•Route Filter Tag Descriptions
•Understanding Route Plans, Cisco CallManager System Guide
Removing Route Filter Clauses
You can remove route filter clauses either when setting up a new route filter or when updating an existing route filter. This procedure describes removing a route filter clause from an existing route filter.
Procedure
Step 1 Choose Route Plan > Route Filter in the menu bar.
Step 2 Locate the route filter from which you want to remove route filter clauses.
Step 3 Scroll down to the top of the clause you want to remove and click Remove Clause.
A dialog box appears warning you that you cannot undo removing this route filter clause.
Caution Each Remove Clause button applies to the clause immediately below the button. Check carefully to ensure that you are removing the correct clause before initiating this action. If you accidentally remove a clause, you cannot returieve it, and you must rebuild it.
Step 4 Click OK to remove the clause or click Cancel to cancel the action. If you click OK, the Cisco CallManager removes the clause from the route filter, and the message "Status: Ready" displays.
Related Topics
•Finding a Route Filter
•Adding a Route Filter
•Deleting a Route Filter
•Understanding Route Plans, Cisco CallManager System Guide
Deleting a Route Filter
The following procedure describes how to delete a route filter.
Note You cannot delete route filters that are being used in route patterns or translation patterns.
Procedure
Step 1 Choose Route Plan > Route Filter in the menu bar.
Step 2 Locate the route pattern you want to delete. See the "Finding a Route Filter" section.
Step 3 Check the check box of the route filter you want to delete and click Delete Selected.
A message displays stating that you cannot undo this action.
Caution Check carefully to ensure that you are deleting the correct route filter before initiating this action. You cannot retrieve deleted route filters. If a route filter is accidentally deleted, you must rebuild it.
Step 4 Click OK to delete the route filter or Cancel to cancel the deletion.
Tips You can also delete a route filter by locating and displaying the route filter you want to delete and clicking Delete.
Related Topics
•Finding a Route Filter
•Adding a Route Filter
•Adding Route Filter Clauses
•Removing Route Filter Clauses
•Understanding Route Plans, Cisco CallManager System Guide
Route Filter Tag Descriptions
The tag serves as the core component of a route filter. A tag applies a name to a subset of the dialed-digit string. For example, the NANP number 972-555-1234 comprises LOCAL-AREA-CODE (972), OFFICE-CODE (555), and SUBSCRIBER (1234) route filter tags.
Route filter tags require operators and can require additional values to decide which calls are filtered.
The values for route filter tag fields can contain the wildcard characters X, *, #, [, ], -, ^, and the numbers 0 through 9. The descriptions in Table 14-2 use the notations [2-9] and XXXX to represent actual digits. In this notation, [2-9] represents any single digit in the range 2 through 9, and X represents any single digit in the range 0 through 9. Therefore, the description "The three-digit area code in the form [2-9]XX" means you can enter the actual digits 200 through 999, or all wildcards, or any mixture of actual digits and wildcards that results in a pattern with that range.
Table 14-2 Route Filter Tags
Tag
|
Description
|
AREA-CODE
|
This three-digit area code in the form [2-9]XX identifies the area code for long-distance calls.
|
COUNTRY CODE
|
These one-, two-, or three-digit codes specify the destination country for international calls.
|
END-OF-DIALING
|
This single character identifies the end of the dialed-digit string. The # character serves as the end-of-dialing signal for international numbers dialed within the NANP.
|
INTERNATIONAL-ACCESS
|
This two-digit access code specifies international dialing. Calls originating in the U.S. use 01 for this code.
|
INTERNATIONAL-DIRECT-DIAL
|
This one-digit code identifies a direct-dialed international call. Calls originating in the U.S. use 1 for this code.
|
INTERNATIONAL-OPERATOR
|
This one-digit code identifies an operator-assisted international call. This code is 0 for calls originating in the U.S.
|
LOCAL-AREA-CODE
|
This three-digit local area code in the form [2-9]XX identifies the local area code for 10-digit local calls.
|
LOCAL-DIRECT-DIAL
|
This one-digit code identifies a direct-dialed local call. NANP calls use 1 for this code.
|
LOCAL-OPERATOR
|
This one-digit code identifies an operator-assisted local call. NANP calls use 0 for this code.
|
LONG-DISTANCE-DIRECT-DIAL
|
This one-digit code identifies a direct-dialed long distance call. NANP calls use 1 for this code.
|
LONG-DISTANCE-OPERATOR
|
These one- or two-digit codes identify an operator-assisted, long-distance call within the NANP. Operator-assisted calls use 0 for this code, and operator access uses 00.
|
NATIONAL-NUMBER
|
This tag specifies the nation-specific part of the digit string for an international call.
|
OFFICE-CODE
|
This tag designates the first three digits of a seven-digit directory number in the form [2-9]XX.
|
SATELLITE-SERVICE
|
This one-digit code provides access to satellite connections for international calls.
|
SERVICE
|
This three-digit code designates services such as 911 for emergency, 611 for repair, and 411 for information.
|
SUBSCRIBER
|
This tag specifies the last four digits of a seven-digit directory number in the form XXXX.
|
TRANSIT-NETWORK
|
This four-digit value identifies a long-distance carrier.
Do not include the leading 101 carrier access code prefix in the TRANSIT-NETWORK value. Refer to TRANSIT-NETWORK-ESCAPE for more information.
|
TRANSIT-NETWORK-ESCAPE
|
This three-digit value precedes the long-distance carrier identifier. The value for this field is 101. Do not include the four-digit carrier identification code in the TRANSIT-NETWORK-ESCAPE value. Refer to TRANSIT-NETWORK for more information.
|
Route filter tag operators determine whether a call is filtered based on the existence, and sometimes the contents, of the dialed-digit string associated with that tag. The operators EXISTS and DOES-NOT-EXIST simply check for the existence of that part of the dialed-digit string. The operator == matches the actual dialed digits with the specified value or pattern. Table 14-3 describes the operators that can be used with route filter tags.
Table 14-3 Route Filter Operators
Operator
|
Description
|
NOT-SELECTED
|
Specifies do not filter calls based on the dialed-digit string associated with this tag.
Note The presence or absence of the tage with which the operator is associated does not prevent Cisco CallManager from routing the call.
|
EXISTS
|
Specifies filter calls when the dialed-digit string associated with this tag is found.
Note Cisco CallManager routes the call only if the dialed-digit string contains a sequence of digits associated with the tag.
|
DOES-NOT-EXIST
|
Specifies filter calls when the dialed-digit string associated with this tag is not found.
Note Cisco CallManager routes the call only if the dialed-digit string does not contain a sequence of digits associated with the tag.
|
==
|
Specifies filter calls when the dialed-digit string associated with this tag matches the specified value.
Note Cisco CallManager routes the call only if the dialed-digit string contains a sequence of digits associated with the tag and within the numbering range specified in the attached field.
|
Caution Do not enter route filter tag values for tags using the operators EXISTS, DOES-NOT-EXIST, or NOT-SELECTED.
Examples
Example 1: A route filter that uses AREA-CODE and the operator DOES-NOT-EXIST selects all dialed-digit strings that do not include an area code.
Example 2: A route filter that uses AREA-CODE, the operator ==, and the entry 515 selects all dialed-digit strings that include the 515 area code.
Example 3: A route filter that uses AREA-CODE, the operator ==, and the entry 5[2-9]X selects all dialed-digit strings that include area codes in the range of 520 through 599.
Example 4: A route filter that uses TRANSIT-NETWORK, the operator ==, and the entry 0288, along with TRANSIT-NETWORK-ESCAPE, the operator ==, and the entry 101, selects all dialed-digit strings with the carrier access code 1010288.
Feedback
