Backup and Restore

This chapter describes Backup and Restore management tasks for Internal Directory mode.

The Backup and Restore function allows you to backup directory data (configuration templates, device and user information, and so forth) to a remote location.

Backup Procedure

Step 1 Log into the Cisco Configuration Engine 1.5 user interface.

Step 2 Go to Tools > Data Manager > Schedule Backup.

The backup information dialog box appears (see Figure 20-1).

Figure 20-1 Backup Schedule Parameters

Step 3 Use the drop-down arrow to select FTP, or TFTP.

Note If you select TFTP, the Username, Password, and Directory fields are disabled.

Step 4 To specify where you want the backup data to be stored, enter the FTP server name in the FTP Server Name field.

Table 20-1 shows valid values for these fields.

Table 20-1 Valid Values for Backup Schedule Parameters 

Attribute
Description
Valid Values

FTP/TFTP

Select TFP or TFTP type.

When you select TFTP server, the Userame, Password and Directory fields are disabled because the TFTP server does not require a username and password, and all the files will go into the TFTP root directory.

Read the Warning (in red) on the GUI page to learn more about setup requirements to use TFTP.

Warning : If you select TFTP, make sure that a file with the name backup-cnsce-{hostname}.tar.gz is already present with 777 permissions in the TFTP enabled directory on the TFTP server. Here, {hostname} is the output of hostname command on the local machine. Just a blank file will also do. For example: backup-cnsce-myie2100.cisco.com.tar.gz

From drop-down

Server name

Server name where all backup files will be put.

a-z
A-Z
0-9
-(hyphen)
_ (under-score)
. (period)

Username

Login username for the FTP server.

a-z
A-Z
0-9
-(hyphen)
_ (under-score)
. (period)

Password

Password for FTP server.

 

Directory

Subdirectory into which all backup files will be put.

Absolute path

Enable Log File Management

determines whether files will be deleted from Cisco 2116 system after backup.

From drop-down list

Backup Schedule

Date and time fields.

As required


Step 5 To specify the username to log into the FTP server, enter a valid username in the Username field.

Step 6 To specify the password to use to log into the FTP server, enter a valid value in the Password field.

Step 7 To specify the subdirectory where the data file is put, enter the absolute path in the Directory field.

Step 8 Choose whether to Enable Log File Management.

Step 9 To specify the backup schedule, complete the fields in the Backup Schedule pane.

Note The time base for the Cisco 2116 system should be set to Coordinated Universal Time (UTC).

Step 10 To cancel this task, click Cancel.

Step 11 To schedule the backup operation, click Backup.

Data Restore Procedure

Step 1 Log into the Cisco 2116 Intelligence Engine.

Step 2 Type datarestore at the command line, then press Enter.

Step 3 Provide inputs to following prompts:

Notes

Sample user inputs are shown in bold text.

FTP Server 

root@i336s6 root]# datarestore

Entering Data Restore section 

Type ctrl-c to exit 


Enter Transfer Protocol (FTP[F] or TFTP[T]): F

Enter FTP server (hostname.domainname or IP address): 10.77.27.17

Enter username used for FTP server: root

Enter FTP password: *****

Re-enter FTP password: *****

Enter absolute pathname of backup file on FTP server: /backup.tar

TFTP Server 

[root@i336s6 root]# datarestore

Entering Data Restore section 

Type ctrl-c to exit 


Enter Transfer Protocol (FTP[F] or TFTP[T]): T

Enter the TFTP server (hostname.domainname or IP address): 10.77.27.17

Enter pathname of backup file on the TFTP server(relative to tftp root dir): 
backup.tar

DNS Server 

[root@i336s6 root]# datarestore

Entering Data Restore section 

Type ctrl-c to exit 


Enter Transfer Protocol (FTP[F] or TFTP[T]): T

Enter the TFTP server (hostname.domainname or IP address): test.cisco.com

Enter DNS server IP address: 10.77.27.1

Enter pathname of backup file on the TFTP server(relative to tftp root dir): 
backup.tar

Definitions

FTP: File transfer protocol.

FTP/TFTP Server: <hostname.domainname>, or IP address, of the FTP/TFTP server on which the backup file is located.

DNS Server: IP address of the DNS server. This appears when you enter a hostname instead of an IP address for the server prompt.

FTP Username: username used for FTP server.

FTP Password: password used to log into the FTP server.

Absolute pathname of backup file on FTP/TFTP server: fully specified path of the backup file stored on the FTP server, or TFTP server (relative to TFTP root directory).