Bulk Data Manager

To access Bulk Data management tasks, log into the system (see "Logging In and Out" section on page 2-1). Then, from the Home page, click the Tools tab. The Tools page appears.

From the Tools page, click Bulk Data Mgr. The Bulk Data Page appears showing:

•Upload Bulk Data

•Create Sample Data

XML DTD

The following example shows the Document Type Definition (DTD) for the XML bulk upload: 

<?xml version="1.0" encoding="utf-8"?>

<!ELEMENT cns-bulk-upload (cns-element-data)>

<!ATTLIST cns-bulk-upload

	stop-on-error (true | false) "false"

>

<!ELEMENT cns-element-data ( NSM-DATA | IMGW-DATA | IMAGE-DATA)>

<!ELEMENT IMGW-DATA (imgw-device*)>

<!ATTLIST IMGW-DATA

	op-type (add) #REQUIRED

>

<!ELEMENT imgw-device (device-id, gateway-id?, device-type, hop-information*)>

<!ELEMENT device-id (#PCDATA)>

<!ELEMENT gateway-id (#PCDATA)>

<!ELEMENT device-type (#PCDATA)>

<!ELEMENT hop-information (hop-type, ip-address?, port?, username?, password?)>

<!ELEMENT hop-type (#PCDATA)>

<!ELEMENT ip-address (#PCDATA)>

<!ELEMENT port (#PCDATA)>

<!ELEMENT username (#PCDATA)>

<!ELEMENT password (#PCDATA)>

<!ELEMENT NSM-DATA (cns-device-container*, cns-device-info*, cns-application-info*, 
cns-group-info*)>

<!ATTLIST NSM-DATA

	op-type (add) #REQUIRED

	validate-data (true | false) #REQUIRED

>

<!ELEMENT cns-device-container (device-container-name+, parent-container?)>

<!-- This tag is to add the sub containers for devices-->

<!ELEMENT device-container-name (#PCDATA)>

<!ELEMENT parent-container (#PCDATA)>

<!-- This is an optional tag that specifies which container the dev. container object is 
to be added-->

<!ELEMENT cns-device-info (cns-device-name, cns-extended-attr*, device-container?, 
dev-image-information?)>

<!ELEMENT device-container (#PCDATA)>

<!-- This is an optional tag that specifies which container this object is to be added-->

<!ELEMENT cns-device-name (#PCDATA)>

<!ELEMENT cns-extended-attr (#PCDATA)>

<!ELEMENT dev-image-information (image-id, activation-template?, dev-image-info+)>

<!ELEMENT image-id (#PCDATA)>

<!ELEMENT activation-template (#PCDATA)>

<!ELEMENT dev-image-info (image-name, distribution)>

<!ELEMENT image-name (#PCDATA)>

<!ELEMENT distribution ( destination?, location)>

<!ATTLIST distribution

	overwrite  (yes | no) "no"

	erase-flash (yes | no) "no"

	activate (true | false) "false"

>

<!ELEMENT destination (#PCDATA)>

<!ELEMENT location (#PCDATA)>

<!ELEMENT cns-application-info (cns-application-name, cns-subject-mapping*, 
application-container?)>

<!ELEMENT application-container (#PCDATA)>

<!-- This is an optional tag that specifies which container this object is to be added-->

<!ELEMENT cns-application-name (#PCDATA)>

<!ELEMENT cns-subject-mapping (cns-original-subject, cns-pub-mapping*, cns-sub-mapping*, 
cns-pub-default, cns-sub-default, cns-extended-attr*)>

<!ELEMENT cns-original-subject (#PCDATA)>

<!ELEMENT cns-pub-mapping (#PCDATA)>

<!ELEMENT cns-sub-mapping (#PCDATA)>

<!ELEMENT cns-pub-default (#PCDATA)>

<!ELEMENT cns-sub-default (#PCDATA)>

<!ELEMENT cns-group-info (cns-group-name, cns-group-application-name*, cns-group-member*, 
cns-extended-attr*, group-container?)>

<!ELEMENT group-container (#PCDATA)>

<!-- This is an optional tag that specifies which container this object is to be added-->

<!ELEMENT cns-group-name (#PCDATA)>

<!ELEMENT cns-group-application-name (#PCDATA)>

<!ELEMENT cns-group-member (#PCDATA)>

<!ATTLIST cns-group-application-name

	application-container CDATA #IMPLIED

>

<!ATTLIST cns-group-member

	device-container CDATA #IMPLIED

>

<!ATTLIST cns-extended-attr

	name CDATA #REQUIRED

>

<!-- Here starts the definition for Image-data-->

<!ELEMENT IMAGE-DATA (image+)>

<!ATTLIST IMAGE-DATA

	op-type (add) #REQUIRED

>

<!ELEMENT image (name, image-info)>

<!ELEMENT name (#PCDATA)>

<!ELEMENT image-info (img-name, img-chksum?, hdr-chksum?, software-version?, 
system-description?, file-byte-size?, platform-family-name?, img-location*)>

<!ATTLIST image-info 

        image-type (IOS | pix-image | pdm | other) "IOS"

>

<!ELEMENT img-name (#PCDATA)>

<!ELEMENT img-chksum (#PCDATA)>

<!ELEMENT hdr-chksum (#PCDATA)>

<!ELEMENT file-byte-size (#PCDATA)>

<!ELEMENT system-description (#PCDATA)>

<!ELEMENT platform-family-name (#PCDATA)>

<!ELEMENT software-version (#PCDATA)>

<!ELEMENT img-location (#PCDATA)>

Uploading Bulk Data

Step 1 From the Bulk Data main menu, click Upload Bulk Data.

The Upload Bulk Data parameters page appears (see Figure 16-1).

Figure 16-1 Upload Bulk Data Parameters

Step 2 If you know the filename of the data file you want to load, enter it in the Filename field, otherwise use the browse function.

Table 16-1shows the valid values for this field.

Table 16-1 Valid Values for Upload Bulk Data

Attribute
Description
Valid Values

Filename

Name of the file containing the data to be uploaded.

a-z
A-Z
0-9
-(hyphen)
_ (under-score)
. (period)


Step 3 Use the drop-down arrow to select the Data Format:

•XML

•CSV

Step 4 To clear this task, click Reset.

Step 5 To upload this data file, click Upload.

Command-Line Upload of Bulk Data

You can also upload the XML file to the directory using a command line utility as follows:

Step 1 FTP the bulk upload XML file to the /opt/CSCOdat/scripts/ directory on the Cisco 2116 system.

Step 2 Log into the box using Telnet

Step 3 Go to: /opt/CSCOdat/scripts/

Step 4 Run the following command to invoke the bulk upload command line utility:

./upload.sh <xml filename>

For example: ./upload.sh my_bulk_data.xml

This uploads the data to the LDAP directory.

Using Data Converter Utility

There is a data converter utility that you can use to convert bulk upload data on a system with a release prior to 1.5. This will allow you to do a bulk upload of data to Cisco Configuration Engine 1.5.

You can find this utility in /opt/CSCOdat/XMLTransform.

Creating Sample Data

Even though the DTD (see "XML DTD" section) outlines the structure of the input XML file, it does not convey the information about what values should be given for each tag. By looking at the sample data files (NSM and IMGW) in this section, you can get an idea of how the data should be arranged in the Bulk Upload XML file.

You can create sample data files for both NSM and IMGW devices.

Step 1 From the Bulk Data main menu, click Add Bulk Data.

The Upload Bulk Data page appears (see Figure 16-2).

Figure 16-2 Create Sample Data Page

Step 2 Enter the prefix name for this sample in the Prefix field.

Table 16-2 shows valid values for these fields.

Table 16-2 Valid Values for Create Sample Data

Attribute
Description
Valid Values

Prefix

Prefix that is used to create the device/application/group objects.

a-z
A-Z
0-9
-(hyphen)
_ (under-score)
. (period)

Data Format

XML, CSV

From drop-down list

Sample Data Without image info

Creates application, group, CNS device data without the image information for CNS device.

From drop-down list

Sample Data With image info

Creates application, group, CNS device data without the image information for CNS device.

Also creates IMAGE object data.

From drop-down list

Sample IMAGE Data only

Creates only IMAGE object data

From drop-down list


Step 3 Select Sample Data.

Step 4 To create this sample, click OK.

NSM Data Sample

The following example shows an NSM data sample for bulk upload: 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE cns-bulk-upload SYSTEM "BulkUpload.dtd">

<cns-bulk-upload stop-on-error="false">

    <cns-element-data>

        <NSM-DATA op-type="add" validate-data="false">

            <cns-device-container>

                <device-container-name>SampleSubDevices</device-container-name>

            </cns-device-container>

            <cns-device-container>

                <device-container-name>SubSubDevices</device-container-name>

                
<parent-container>ou=SampleSubDevices,ou=CNSDevices,ou=cns-pokhran4,o=infy,c=in</parent-co
ntainer>

            </cns-device-container>

            <cns-device-info>

                <cns-device-name>SampleDevice1</cns-device-name>

                <cns-extended-attr 
name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>

                <cns-extended-attr name="IOSConfigID">SampleDevice1</cns-extended-attr>

                <cns-extended-attr name="IOSEventID">SampleDevice1</cns-extended-attr>

            </cns-device-info>

            <cns-device-info>

                <cns-device-name>SampleDevice2</cns-device-name>

                <cns-extended-attr 
name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>

                <cns-extended-attr name="IOSConfigID">SampleDevice2</cns-extended-attr>

                <cns-extended-attr name="IOSEventID">SampleDevice2</cns-extended-attr>

            </cns-device-info>

            <cns-device-info>

                <cns-device-name>SampleDevice3</cns-device-name>

                <cns-extended-attr 
name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>

                <cns-extended-attr name="IOSConfigID">SampleDevice3</cns-extended-attr>

                <cns-extended-attr name="IOSEventID">SampleDevice3</cns-extended-attr>

            </cns-device-info>

            <cns-device-info>

                <cns-device-name>SampleDevice4</cns-device-name>

                <cns-extended-attr 
name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>

                <cns-extended-attr name="IOSConfigID">SampleDevice4</cns-extended-attr>

                <cns-extended-attr name="IOSEventID">SampleDevice4</cns-extended-attr>

                
<device-container>ou=SampleSubDevices,ou=CNSDevices,ou=cns-pokhran4,o=infy,c=in</device-co
ntainer>

            </cns-device-info>

            <cns-device-info>

                <cns-device-name>SampleDevice5</cns-device-name>

                <cns-extended-attr 
name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>

                <cns-extended-attr name="IOSConfigID">SampleDevice5</cns-extended-attr>

                <cns-extended-attr name="IOSEventID">SampleDevice5</cns-extended-attr>

                
<device-container>ou=SubSubDevices,ou=SampleSubDevices,ou=CNSDevices,ou=cns-pokhran4,o=inf
y,c=in</device-container>

            </cns-device-info>

            <cns-application-info>

                <cns-application-name>SampleTestApp</cns-application-name>

                <cns-subject-mapping>

                    <cns-original-subject>SampleTestApp.Event1</cns-original-subject>

                    
<cns-pub-mapping>SampleTestApp.Event1.cns-pub-mapping</cns-pub-mapping>

                    
<cns-sub-mapping>SampleTestApp.Event1.cns-sub-mapping</cns-sub-mapping>

                    <cns-pub-default>0</cns-pub-default>

                    <cns-sub-default>0</cns-sub-default>

                </cns-subject-mapping>

                <cns-subject-mapping>

                    <cns-original-subject>SampleTestApp.Event2</cns-original-subject>

                    
<cns-pub-mapping>SampleTestApp.Event2.cns-pub-mapping</cns-pub-mapping>

                    
<cns-sub-mapping>SampleTestApp.Event2.cns-sub-mapping</cns-sub-mapping>

                    <cns-pub-default>0</cns-pub-default>

                    <cns-sub-default>0</cns-sub-default>

                </cns-subject-mapping>

            </cns-application-info>

            <cns-group-info>

                <cns-group-name>SampleGroup1</cns-group-name>

                <cns-group-application-name>SampleTestApp</cns-group-application-name>

                <cns-group-member>SampleDevice1</cns-group-member>

                <cns-group-member>SampleDevice2</cns-group-member>

                <cns-group-member>SampleDevice3</cns-group-member>

            </cns-group-info>

            <cns-group-info>

                <cns-group-name>SampleGroup2</cns-group-name>

                <cns-group-application-name>SampleTestApp</cns-group-application-name>

                <cns-group-member>SampleDevice1</cns-group-member>

                <cns-group-member>SampleDevice2</cns-group-member>

                <cns-group-member>SampleDevice3</cns-group-member>

                <cns-group-member 
device-container="ou=SampleSubDevices,ou=CNSDevices,ou=cns-pokhran4,o=infy,c=in">SampleDev
ice4</cns-group-member>

                <cns-group-member 
device-container="ou=SubSubDevices,ou=SampleSubDevices,ou=CNSDevices,ou=cns-pokhran4,o=inf
y,c=in">SampleDevice5</cns-group-member>

            </cns-group-info>

        </NSM-DATA>

    </cns-element-data>

</cns-bulk-upload>


NSM Data Sample With Image Information

The following example shows an NSM data sample with image information: 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE cns-bulk-upload SYSTEM "BulkUpload.dtd">

<cns-bulk-upload stop-on-error="false">

    <cns-element-data>

        <NSM-DATA op-type="add" validate-data="false">

            <cns-device-container>

                <device-container-name>xyzSubDevices</device-container-name>

            </cns-device-container>

            <cns-device-container>

                <device-container-name>SubSubDevices</device-container-name>

                
<parent-container>ou=xyzSubDevices,ou=CNSDevices,ou=cns-pokhran4,o=cisco,c=us</parent-cont
ainer>

            </cns-device-container>

            <cns-device-info>

                <cns-device-name>xyzDevice1</cns-device-name>

                <cns-extended-attr 
name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>

                <cns-extended-attr name="IOSConfigID">xyzDevice1</cns-extended-attr>

                <cns-extended-attr name="IOSEventID">xyzDevice1</cns-extended-attr>

                <dev-image-information>

                    <image-id>xyzDevice1</image-id>

                    <activation-template>DemoRouter.cfgtpl</activation-template>

                    <dev-image-info>

                        <image-name>xyzIMAGEObj1</image-name>

                        <distribution overwrite="yes" erase-flash="no" activate="false">

                            <destination>flash</destination>

                            <location>tftp://test.com/c7200-js-mz1</location>

                        </distribution>

                    </dev-image-info>

                </dev-image-information>

            </cns-device-info>

            <cns-device-info>

                <cns-device-name>xyzDevice2</cns-device-name>

                <cns-extended-attr 
name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>

                <cns-extended-attr name="IOSConfigID">xyzDevice2</cns-extended-attr>

                <cns-extended-attr name="IOSEventID">xyzDevice2</cns-extended-attr>

                <dev-image-information>

                    <image-id>xyzDevice2</image-id>

                    <activation-template>DemoRouter.cfgtpl</activation-template>

                    <dev-image-info>

                        <image-name>xyzIMAGEObj2</image-name>

                        <distribution overwrite="yes" erase-flash="no" activate="false">

                            <destination>flash</destination>

                            <location>tftp://test.com/c7200-js-mz2</location>

                        </distribution>

                    </dev-image-info>

                </dev-image-information>

            </cns-device-info>

            <cns-device-info>

                <cns-device-name>xyzDevice3</cns-device-name>

                <cns-extended-attr 
name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>

                <cns-extended-attr name="IOSConfigID">xyzDevice3</cns-extended-attr>

                <cns-extended-attr name="IOSEventID">xyzDevice3</cns-extended-attr>

                <dev-image-information>

                    <image-id>xyzDevice3</image-id>

                    <activation-template>DemoRouter.cfgtpl</activation-template>

                    <dev-image-info>

                        <image-name>xyzIMAGEObj3</image-name>

                        <distribution overwrite="yes" erase-flash="no" activate="false">

                            <destination>flash</destination>

                            <location>tftp://test.com/c7200-js-mz3</location>

                        </distribution>

                    </dev-image-info>

                </dev-image-information>

            </cns-device-info>

            <cns-device-info>

                <cns-device-name>xyzDevice4</cns-device-name>

                <cns-extended-attr 
name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>

                <cns-extended-attr name="IOSConfigID">xyzDevice4</cns-extended-attr>

                <cns-extended-attr name="IOSEventID">xyzDevice4</cns-extended-attr>

                
<device-container>ou=xyzSubDevices,ou=CNSDevices,ou=cns-pokhran4,o=cisco,c=us</device-cont
ainer>

                <dev-image-information>

                    <image-id>xyzDevice4</image-id>

                    <activation-template>DemoRouter.cfgtpl</activation-template>

                    <dev-image-info>

                        <image-name>xyzIMAGEObj4</image-name>

                        <distribution overwrite="yes" erase-flash="no" activate="false">

                            <destination>flash</destination>

                            <location>tftp://test.com/c7200-js-mz4</location>

                        </distribution>

                    </dev-image-info>

                </dev-image-information>

            </cns-device-info>

            <cns-device-info>

                <cns-device-name>xyzDevice5</cns-device-name>

                <cns-extended-attr 
name="IOSconfigtemplate">DemoRouter.cfgtpl</cns-extended-attr>

                <cns-extended-attr name="IOSConfigID">xyzDevice5</cns-extended-attr>

                <cns-extended-attr name="IOSEventID">xyzDevice5</cns-extended-attr>

                
<device-container>ou=SubSubDevices,ou=xyzSubDevices,ou=CNSDevices,ou=cns-pokhran4,o=cisco,
c=us</device-container>

                <dev-image-information>

                    <image-id>xyzDevice5</image-id>

                    <activation-template>DemoRouter.cfgtpl</activation-template>

                    <dev-image-info>

                        <image-name>xyzIMAGEObj5</image-name>

                        <distribution overwrite="yes" erase-flash="no" activate="false">

                            <destination>flash</destination>

                            <location>tftp://test.com/c7200-js-mz5</location>

                        </distribution>

                    </dev-image-info>

                </dev-image-information>

            </cns-device-info>

            <cns-application-info>

                <cns-application-name>xyzTestApp</cns-application-name>

                <cns-subject-mapping>

                    <cns-original-subject>xyzTestApp.Event1</cns-original-subject>

                    <cns-pub-mapping>xyzTestApp.Event1.cns-pub-mapping</cns-pub-mapping>

                    <cns-sub-mapping>xyzTestApp.Event1.cns-sub-mapping</cns-sub-mapping>

                    <cns-pub-default>1</cns-pub-default>

                    <cns-sub-default>1</cns-sub-default>

                </cns-subject-mapping>

                <cns-subject-mapping>

                    <cns-original-subject>xyzTestApp.Event2</cns-original-subject>

                    <cns-pub-mapping>xyzTestApp.Event2.cns-pub-mapping</cns-pub-mapping>

                    <cns-sub-mapping>xyzTestApp.Event2.cns-sub-mapping</cns-sub-mapping>

                    <cns-pub-default>1</cns-pub-default>

                    <cns-sub-default>1</cns-sub-default>

                </cns-subject-mapping>

            </cns-application-info>

            <cns-group-info>

                <cns-group-name>xyzGroup1</cns-group-name>

                <cns-group-application-name>xyzTestApp</cns-group-application-name>

                <cns-group-member>xyzDevice1</cns-group-member>

                <cns-group-member>xyzDevice2</cns-group-member>

                <cns-group-member>xyzDevice3</cns-group-member>

            </cns-group-info>

            <cns-group-info>

                <cns-group-name>xyzGroup2</cns-group-name>

                <cns-group-application-name>xyzTestApp</cns-group-application-name>

                <cns-group-member>xyzDevice1</cns-group-member>

                <cns-group-member>xyzDevice2</cns-group-member>

                <cns-group-member>xyzDevice3</cns-group-member>

                <cns-group-member 
device-container="ou=xyzSubDevices,ou=CNSDevices,ou=cns-pokhran4,o=cisco,c=us">xyzDevice4<
/cns-group-member>

                <cns-group-member 
device-container="ou=SubSubDevices,ou=xyzSubDevices,ou=CNSDevices,ou=cns-pokhran4,o=cisco,
c=us">xyzDevice5</cns-group-member>

            </cns-group-info>

        </NSM-DATA>

    </cns-element-data>

</cns-bulk-upload>


NOTES

•

For Bulk Upload of NSM devices with Image Info, make sure that the image objects referenced in the
dev-image-info element tag already exist.

•

 The location given should be one of the multiple image locations specified with the image object.

•

If there are errors while adding the devices, please check the error file provided as a result of the Upload operation. There can be an exception given as CISException, which points to the CISDevice creation failed, which could have occurred if you had ignored the checklist. In this case, just recheck the information provided in the
dev-image-information element tag. Correct the file and upload it again. 

Image Sample Data

The following example shows image data sample: 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE cns-bulk-upload SYSTEM "BulkUpload.dtd">

<cns-bulk-upload stop-on-error="false">

    <cns-element-data>

        <IMAGE-DATA op-type="add">

            <image>

                <name>xyzIMAGEObj1</name>

                <image-info image-type="IOS">

                    <img-name>c7200-js-mz1</img-name>

                    <img-chksum>0x1256faf245</img-chksum>

                    <software-version>12.2(8)T6</software-version>

                    <system-description>Cisco Network Operating 
System</system-description>

                    <file-byte-size>1040</file-byte-size>

                    <platform-family-name>7200</platform-family-name>

                    <img-location>tftp://test.com/c7200-js-mz1</img-location>

                </image-info>

            </image>

            <image>

                <name>xyzIMAGEObj2</name>

                <image-info image-type="IOS">

                    <img-name>c7200-js-mz2</img-name>

                    <img-chksum>0x1256faf245</img-chksum>

                    <software-version>12.2(8)T6</software-version>

                    <system-description>Cisco Network Operating 
System</system-description>

                    <file-byte-size>1040</file-byte-size>

                    <platform-family-name>7200</platform-family-name>

                    <img-location>tftp://test.com/c7200-js-mz2</img-location>

                </image-info>

            </image>

            <image>

                <name>xyzIMAGEObj3</name>

                <image-info image-type="IOS">

                    <img-name>c7200-js-mz3</img-name>

                    <img-chksum>0x1256faf245</img-chksum>

                    <software-version>12.2(8)T6</software-version>

                    <system-description>Cisco Network Operating 
System</system-description>

                    <file-byte-size>1040</file-byte-size>

                    <platform-family-name>7200</platform-family-name>

                    <img-location>tftp://test.com/c7200-js-mz3</img-location>

                </image-info>

            </image>

            <image>

                <name>xyzIMAGEObj4</name>

                <image-info image-type="IOS">

                    <img-name>c7200-js-mz4</img-name>

                    <img-chksum>0x1256faf245</img-chksum>

                    <software-version>12.2(8)T6</software-version>

                    <system-description>Cisco Network Operating 
System</system-description>

                    <file-byte-size>1040</file-byte-size>

                    <platform-family-name>7200</platform-family-name>

                    <img-location>tftp://test.com/c7200-js-mz4</img-location>

                </image-info>

            </image>

            <image>

                <name>xyzIMAGEObj5</name>

                <image-info image-type="IOS">

                    <img-name>c7200-js-mz5</img-name>

                    <img-chksum>0x1256faf245</img-chksum>

                    <software-version>12.2(8)T6</software-version>

                    <system-description>Cisco Network Operating 
System</system-description>

                    <file-byte-size>1040</file-byte-size>

                    <platform-family-name>7200</platform-family-name>

                    <img-location>tftp://test.com/c7200-js-mz5</img-location>

                </image-info>

            </image>

        </IMAGE-DATA>

    </cns-element-data>

</cns-bulk-upload>

IMGW Sample Data

The following example shows an IMGW data sample for bulk upload: 

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE cns-bulk-upload SYSTEM "BulkUpload.dtd">

<cns-bulk-upload stop-on-error="false">

    <cns-element-data>

        <IMGW-DATA op-type="add">

            <imgw-device>

                <device-id>xyzIMGWDevice1</device-id>

                <gateway-id>xyzIMGWGatewayID1</gateway-id>

                <device-type>IOS</device-type>

            </imgw-device>

            <imgw-device>

                <device-id>xyzIMGWDevice2</device-id>

                <gateway-id>xyzIMGWGatewayID2</gateway-id>

                <device-type>IOS</device-type>

                <hop-information>

                    <hop-type>IOS_LOGIN</hop-type>

                    <ip-address>0.0.0.0</ip-address>

                    <port>0000</port>

                    <username>xyzusr2</username>

                    <password>xyzpwd2</password>

                </hop-information>

            </imgw-device>

            <imgw-device>

                <device-id>xyzIMGWDevice3</device-id>

                <gateway-id>xyzIMGWGatewayID3</gateway-id>

                <device-type>IOS</device-type>

                <hop-information>

                    <hop-type>IOS_LOGIN</hop-type>

                    <ip-address>0.0.0.0</ip-address>

                    <port>0000</port>

                    <username>xyzusr3</username>

                    <password>xyzpwd3</password>

                </hop-information>

                <hop-information>

                    <hop-type>IOS_LOGIN</hop-type>

                    <ip-address>0.0.0.0</ip-address>

                    <port>0000</port>

                    <username>xyzuser3</username>

                    <password>xyzpasswd3</password>

                </hop-information>

            </imgw-device>

            <imgw-device>

                <device-id>xyzIMGWDevice4</device-id>

                <gateway-id>xyzIMGWGatewayID4</gateway-id>

                <device-type>IOS</device-type>

                <hop-information>

                    <hop-type>IOS_LOGIN</hop-type>

                    <ip-address>0.0.0.0</ip-address>

                    <port>0000</port>

                    <username>xyzusr4</username>

                    <password>xyzpwd4</password>

                </hop-information>

                <hop-information>

                    <hop-type>IOS_LOGIN</hop-type>

                    <ip-address>0.0.0.0</ip-address>

                    <port>0000</port>

                    <username>xyzuser4</username>

                    <password>xyzpasswd4</password>

                </hop-information>

            </imgw-device>

            <imgw-device>

                <device-id>xyzIMGWDevice5</device-id>

                <gateway-id>xyzIMGWGatewayID5</gateway-id>

                <device-type>IOS</device-type>

                <hop-information>

                    <hop-type>IOS_LOGIN</hop-type>

                    <ip-address>0.0.0.0</ip-address>

                    <port>0000</port>

                    <username>xyzusr5</username>

                    <password>xyzpwd5</password>

                </hop-information>

                <hop-information>

                    <hop-type>IOS_LOGIN</hop-type>

                    <ip-address>0.0.0.0</ip-address>

                    <port>0000</port>

                    <username>xyzuser5</username>

                    <password>xyzpasswd5</password>

                </hop-information>

            </imgw-device>

        </IMGW-DATA>

    </cns-element-data>

</cns-bulk-upload>