Migration : NCS4K-ECU to NCS4K-ECU2

This chapter provides the CTC procedure for migration of Extenal Connection Unit (ECU) in a Multi Chassis system.

Migrate from NCS4K-ECU to NCS4K-ECU2

Purpose

This procedure provide instructions to migrate from NCS4K-ECU to NCS4K-ECU2 using CTC.

Tools/Equipment

None

Prerequisite Procedures

"Login to CTC" in System Setup and Software Installation Guide for Cisco NCS 4000 Series.

Required/As Needed

As needed

Onsite/Remote

Onsite

Security Level

Provisioning or higher

Note

Do not perform router or route processor reload during the migration procedure.



Note

To check the current status of migration while performing this procedure, click the Status button.



Note

You can check the alarm(s) and alarm state in the Alarms tab of CTC.


Procedure


Step 1

In the Node View, click the Maintenance > ECU Upgrade tab.

Step 2

Click the Detach button.

Step 3

Click the Yes button.

Alarms The Detach Operation for disk started and Disk provision will be raised.
Step 4

Wait for the alarm The Detach Operation for disk started to clear.

Note 

The Disk provision alarm will persist all through the migration procedure.

Step 5

Remove the NCS4K-ECU unit physically form the chassis and replace it with the NCS4K-ECU2 unit.

Note 

For detailed procedure on Removing and Replacing the ECU unit refer Hardware Installation Guide for Cisco NCS 4000 Series.

Step 6

Wait 2-3 minutes, for the newly installed ECU unit to initialize.

Step 7

Check to ensure that the ECU Plugged out alarm has cleared.

Note 

Proceeding to next step without waiting for ECU Plugged out alarm to clear, may lead system to inconsistent system state.

Step 8

Click the Attach button.

This will trigger the attach procedure and The attach provision for disk started alarm will be raised.

Step 9

Wait for Disk Provision and The attach provision for disk started alarms to clear.

Once above alarms are cleared from the system, ECU migration from NCS4K-ECU to NCS4K- ECU2 is completed successfully.

Stop. You have completed this procedure.