Configure LC Priority Shutdown

This chapter describes the procedure to configure the shutdown priority on line cards using IOS.

Configure LC Priority Shutdown

This task enables the LC priority shutdown feature on a NCS 4000 chassis and assigns a shutdown priority on the line cards. For more information, see LC Priority Shutdown.

Procedure


Step 1

configure

Enters the configuration mode terminal.

Example:

RP/0/RP0:hostname# configure

Step 2

power-mgmt progressive location rack-id

Enables the LC priority shutdown feature on the chassis specified and assigns a default priority of 20 to all the line cards.

To disable this feature, use the no form of this command.

Example:

RP/0/RP0:hostname (config)#power-mgmt progressive location L0

Step 3

priority location line-card-location card-priority

Configures the shutdown priority to the line card specified.

To remove the priority, use the no form of this command.

Example:

RP/0/RP0:hostname (config-location-L0)#priority location 0/9 6

Step 4

commit