Configuring PRBS

This chapter describes the procedure to configure the PRBS.

Configure PRBS

Procedure

Step 1

exec

Example:

Router> exec

Enables privileged EXEC mode.

  • Enter your password if prompted.

Step 2

terminal controller

Example:

Router(config)# controller optics 0/15/0/2 port-mode otn framing opu2

Enters the global configuration mode.

Step 3

secondary-admin-state

Example:

Router(config)#controller odu2 0/15/0/2 secondary-admin-state maintenance

Enters the secondary admin state.

Step 4

opu prbs mode {source|source-sink|sink} pattern {PN11|PN23|PN31|INVERTED_PN11|INVRTED_PN31}

Example:

Router(config)# controller odu2 0/15/0/2 opu prbs mode source pattern pn31

Enters the attribute set in the path protection profile.

Step 5

exit

Example:

Router(config)# exit

Exits the controller configuration mode.