Table Of Contents

Translation Pattern Configuration

Finding a Translation Pattern

Adding a Translation Pattern

Updating a Translation Pattern

Copying a Translation Pattern

Deleting a Translation Pattern

Translation Pattern Configuration Settings

Translation Pattern Configuration

---

The Cisco CallManager uses translation patterns to manipulate dialed digits before it routes a call. In some cases, the system does not use the dialed number. In other cases, the public switched telephone network (PSTN) does not recognize the dialed number.

Use the following topics to add, update, copy, or delete a translation pattern:

•Finding a Translation Pattern

•Adding a Translation Pattern

•Updating a Translation Pattern

•Copying a Translation Pattern

•Deleting a Translation Pattern

•Translation Pattern Configuration Settings

Finding a Translation Pattern

Because you might have several translation patterns in your network, Cisco CallManager lets you locate specific translation patterns by using specific criteria as the basis. Use the following procedure to locate translation patterns.

---

Note During your work in a browser session, Cisco CallManager Administration retains your translation pattern search preferences. If you navigate to other menu items and return to this menu item, Cisco CallManager Administration retains your translation pattern search preferences until you modify your search or close the browser.

---

Procedure

---

Step 1 Choose Route Plan > Translation Pattern.

The Find and List Translation Patterns window displays.

Step 2 From the first drop-down list box, choose one of the following criteria:

•Pattern (to search by translation pattern names)

•Description (to search by translation pattern descriptions)

•Partition (to search by the partition name)

---

Note The criterion that you choose in this drop-down list box specifies how the list of translation patterns that your search generates will be sorted. For example, if you choose Description, the Description column will display as the left column of the results list.

---

From the second drop-down list box, choose one of the following criteria:

•begins with

•contains

•ends with

•is exactly

Step 3 Specify the appropriate search text, if applicable, and click Find. You can also specify how many items per page to display.

---

Note To find all translation patterns that are registered in the database, click Find without entering any search text.

---

A list of discovered translation patterns displays by

•Translation pattern icon

•Translation pattern

•Partition

•Description

•Route filter

---

Note You can delete multiple translation patterns from the Find and List Translation Patterns window by checking the check boxes next to the appropriate translation patterns and clicking Delete Selected. You can delete all the translation patterns in the window by checking the check box in the matching records title bar and clicking Delete Selected.

---

Step 4 From the list of records, click the translation pattern that matches your search criteria.

The Translation Pattern Configuration window displays the translation pattern that you choose.

---

Related Topics

•Adding a Translation Pattern

•Updating a Translation Pattern

•Copying a Translation Pattern

•Deleting a Translation Pattern

•Translation Pattern Configuration Settings

Adding a Translation Pattern

This section describes how to add a translation pattern.

Before You Begin

Configure the following Cisco CallManager items before adding a translation pattern:

•Partition

•Route filter

•Calling search space

Procedure

---

Step 1 Choose Route Plan > Translation Pattern.

Step 2 Click Add a New Translation Pattern.

Step 3 Enter the appropriate configuration settings as described in Table 22-1.

Step 4 Click Insert.

---

Related Topics

•Finding a Translation Pattern

•Updating a Translation Pattern

•Copying a Translation Pattern

•Deleting a Translation Pattern

•Translation Pattern Configuration Settings

Updating a Translation Pattern

This section describes how to update a translation pattern.

Procedure

---

Step 1 Choose Route Plan > Translation Pattern.

Step 2 Locate the translation pattern that you want to update. See the "Finding a Translation Pattern" section.

Step 3 Update the appropriate settings as described in the "Translation Pattern Configuration Settings" section.

---

Note Ensure that the translation pattern, that uses the selected partition, route filter, and numbering plan combination, is unique. Check the route pattern/hunt pilot, translation pattern, directory number, call park number, call pickup number, or meet-me number configuration windows if you receive an error that indicates duplicate entries.

---

Step 4 Click Update.

The window displays the updated translation pattern.

---

Related Topics

•Finding a Translation Pattern

•Adding a Translation Pattern

•Copying a Translation Pattern

•Deleting a Translation Pattern

•Translation Pattern Configuration Settings

Copying a Translation Pattern

This section describes how to copy a translation pattern.

Procedure

---

Step 1 Choose Route Plan > Translation Pattern.

Step 2 Locate the translation pattern that you want to copy. See the "Finding a Translation Pattern" section.

Step 3 Check the check box next to the translation pattern that you want to copy.

Step 4 Click the Copy icon of that translation pattern.

The window displays the copy of the translation pattern.

Step 5 Update the appropriate settings as described in Table 22-1.

Step 6 Click Insert to add the new translation pattern.

---

Related Topics

•Finding a Translation Pattern

•Adding a Translation Pattern

•Updating a Translation Pattern

•Deleting a Translation Pattern

•Translation Pattern Configuration Settings

•Understanding Route Plans, Cisco CallManager System Guide

Deleting a Translation Pattern

This section describes how to delete a translation pattern.

Procedure

---

Step 1 Choose Route Plan > Translation Pattern.

Step 2 Locate the translation pattern that you want to delete. See the "Finding a Translation Pattern" section.

Step 3 Check the check box of the translation pattern that you want to delete and click Delete Selected.

A message displays that states that you cannot undo this action.

Step 4 To delete the translation pattern, click OK or, to cancel the deletion, click Cancel.

---

Caution Check carefully to ensure that you are deleting the correct translation pattern before you initiate this action. You cannot retrieve deleted translation patterns. If a translation pattern is accidentally deleted, you must rebuild it.

---

---

Tip You can also delete a translation pattern by locating and displaying the translation pattern that you want to delete and clicking Delete.

---

---

Related Topics

•Finding a Translation Pattern

•Adding a Translation Pattern

•Updating a Translation Pattern

•Copying a Translation Pattern

•Translation Pattern Configuration Settings

Translation Pattern Configuration Settings

Table 22-1 describes the available fields in the Translation Pattern Configuration window.

Table 22-1 Translation Pattern Configuration Settings 

Field	Description
Pattern Definition
Translation Pattern	Enter the translation pattern, including numbers and wildcards (do not use spaces), in the Translation Pattern field. For example, for the NANP, enter 9.@ for typical local access or 8XXX for a typical private network numbering plan. If you leave this field blank, you must select a partition from the Partition drop-down list box. Note Ensure that the translation pattern, which uses the chosen partition, route filter, and numbering plan combination, is unique. Check the route pattern/hunt pilot, translation pattern, directory number, call park number, call pickup number, or meet-me number if you receive an error that indicates duplicate entries. Alternatively, check the route plan report if you receive an error that indicates duplicate entries.
Partition	Choose a partition. If you do not want to assign a partition, choose <None>. If you choose <None>, you must enter a value in the Translation Pattern field. If more than 250 partitions exist, the ellipsis (...) button displays next to the drop-down list box. Click the ... button to display the Select Partition window. Enter a partial partition name in the List items where Name contains field. Click the desired partition name in the list of partitions that displays in the Select item to use box and click OK. Note To set the maximum list box items, choose System > Enterprise Parameters and choose CCMAdmin Parameters. Note Make sure that the combination of translation pattern, route filter, and partition is unique within the Cisco CallManager cluster.
Description	Enter a description for the translation pattern.
Numbering Plan	Choose a numbering plan.
Route Filter	Choosing an optional route filter restricts certain number patterns. See the "Route Pattern Wildcards and Special Characters" section in the Cisco CallManager System Guide and the "Route Filter Configuration" section on page 17-1 for more information. The route filters that display depend on the numbering plan that you choose from the Numbering Plan drop-down list box. If more than 250 route filters exist, the ellipsis button (...) displays next to the drop-down list box. Click the ... button to display the Select Route Filters window. Enter a partial route filter name in the List items where Name contains field. Click the desired route filter name in the list of route filters that displays in the Select item to use box and click OK. Note To set the maximum list box items, choose System > Enterprise Parameters and choose CCMAdmin Parameters.
Calling Search Space	Choose the calling search space for which you are adding a translation pattern, if necessary.
MLPP Precedence	Choose an MLPP precedence setting for this translation pattern from the drop-down list box: •Flash Override—Highest precedence setting (level 0) for MLPP calls. •Flash—Second-highest precedence setting (level 1) for MLPP calls. •Immediate—Third-highest precedence setting (level 2) for MLPP calls. •Priority—Fourth-highest precedence setting (level 3) for MLPP calls. •Routine—Lowest precedence setting (level 4) for MLPP calls. •Default—Does not override the incoming precedence level but rather lets it pass unchanged.
Route Option	The Route Option designation indicates whether you want this translation pattern used for routing calls (such as 9.@ or 8[2-9]XX) or for blocking calls. Choose the Route this pattern or Block this pattern radio button. If you choose the Block this pattern radio button, you must choose the reason for which you want this translation pattern to block calls. Choose a value from the drop-down list box: •No Error •Unallocated Number •Call Rejected •Number Changed •Invalid Number Format •Precedence Level Exceeded
Provide Outside Dial Tone	Check the check box if appropriate.
Allow Overlap Sending	Check the check box if appropriate.
Urgent Priority	Cisco CallManager sets all translation patterns with urgent priority, and you cannot change the priority of the translation patterns.
Calling Party Transformations
Use Calling Party's External Phone Number Mask	Check the check box if you want the full, external phone number to be used for calling line identification (CLID) on outgoing calls.
Calling Party Transform Mask	Enter a transformation mask value. Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and blank. If this field is blank and the preceding field is not checked, no calling party transformation takes place. See the "Adding a Route/Hunt List" section for more detailed information.
Prefix Digits (Outgoing Calls)	Enter prefix digits. Valid entries for the NANP include the digits 0 through 9, #, *, and blank. Note The appended prefix digit does not affect which directory numbers route to the assigned device.
Calling Line ID Presentation	Cisco CallManager uses calling line ID presentation (CLIP/CLIR) as a supplementary service to allow or restrict the originating caller's phone number on a call-by-call basis. Choose whether you want the Cisco CallManager to allow or restrict the display of the calling party's phone number on the called party's phone display for this translation pattern. Choose Default if you do not want to change calling line ID presentation. Choose Allowed if you want Cisco CallManager to allow the display of the calling number. Choose Restricted if you want Cisco CallManager to block the display of the calling number. For more information about this field, see Table 14-6 in the "Calling Party Number Transformations Settings" section in the Cisco CallManager System Guide.
Calling Name Presentation	Cisco CallManager uses calling name presentation (CNIP/CNIR) as a supplementary service to allow or restrict the originating caller's name on a call-by-call basis. Choose whether you want the Cisco CallManager to allow or restrict the display of the calling party's name on the called party's phone display for this translation pattern. Choose Default if you do not want to change calling name presentation. Choose Allowed if you want Cisco CallManager to display the calling name information. Choose Restricted if you want Cisco CallManager to block the display of the calling name information. For more information about this field, see Table 14-6 in the "Calling Party Number Transformations Settings" section in the Cisco CallManager System Guide.
Connected Party Transformations
Connected Line ID Presentation	Cisco CallManager uses connected line ID presentation (COLP/COLR) as a supplementary service to allow or restrict the called party's phone number on a call-by-call basis. Choose whether you want Cisco CallManager to allow or restrict the display of the connected party's phone number on the calling party's phone display for this translation pattern. Choose Default if you do not want to change the connected line ID presentation. Choose Allowed if you want to display the connected party's phone number. Choose Restricted if you want Cisco CallManager to block the display of the connected party's phone number. For more information about this field, see Table 14-9 in the "Connected Party Presentation and Restriction Settings" section in the Cisco CallManager System Guide.
Connected Name Presentation	Cisco CallManager uses connected name presentation (CONP/CONR) as a supplementary service to allow or restrict the called party's name on a call-by-call basis. Choose whether you want Cisco CallManager to allow or restrict the display of the connected party's name on the calling party's phone display for this translation pattern. Choose Default if you do not want to change the connected name presentation. Choose Allowed if you want to display the connected party's name. Choose Restricted if you want Cisco CallManager to block the display of the connected party's name. For more information about this field, see Table 14-9 in the "Connected Party Presentation and Restriction Settings" section in the Cisco CallManager System Guide.
Called Party Transformations
Discard Digits	Choose the discard digits instructions that you want to be associated with this translation pattern. See the "Discard Digits Instructions" section in the Cisco CallManager System Guide for more information. Note The discard digits that display depend on the numbering plan that you choose from the Numbering Plan drop-down list box.
Called Party Transform Mask	Enter a transformation mask value. Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and blank. If the field is blank, no transformation takes place. The dialed digits get sent exactly as dialed.
Prefix Digits (Outgoing Calls)	Enter prefix digits. Valid entries for the NANP include the digits 0 through 9, #, *, and blank. Note The appended prefix digit does not affect which directory numbers route to the assigned device.

Related Topics

•Finding a Translation Pattern

•Adding a Translation Pattern

•Updating a Translation Pattern

•Copying a Translation Pattern

•Deleting a Translation Pattern