IP Pool Management Policy Configuration Mode Commands

Mode

The IP Pool Management Policy Configuration Mode is used to configure and manage the IP Pool management policies.

Exec > Global Configuration > Context Configuration > IP Pool Management Policy Configuration

configure > context context_name > ip-pool-mgmt-policy policy_name

Entering the above command sequence results in the following prompt:

[ context_name]host_name (config-ip-pool-mgmt-policy)#

Important

The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).

Important

For information on common commands available in this configuration mode, refer to the Common Commands chapter.

user-plane-group

Use this command to associate IP Pools to UP Group.

Product

CUPS

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > IP Pool Management Policy Configuration

configure > context context_name > ip-pool-mgmt-policy policy_name

Entering the above command sequence results in the following prompt:

[ context_name]host_name (config-ip-pool-mgmt-policy)#

Syntax

user-plane-group group_name { ip-address-pool-name ipv4_pool_name | ipv6-address-pool-name ipv6_pool_name }

group_name

Specifies the UP Group name and must be a string of size 1-31.

ipv4_pool_name

Specifies the IPv4 address pool name and must be a string of size 1-31.

ipv6_pool_name

Specifies the IPv6 address pool name and must be a string of size 1-31.

Usage Guidelines

Use this command to configure multiple UP Groups, and UP Group-specific IP pools for an APN.

Example

The following command adds v4-pool and v6-pool to a UP Group named G1 : 

user-plane-group G1 ip-address-pool-name v4-pool ipv6-address-pool-name v6-pool