diameter
This command configures the Diameter interface to be associated with the SMSC service.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME SMSC Service Configuration
configure > context context_name > smsc-service smsc_svc_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-smsc-service)#
Syntax
diameter { dictionary standard | endpoint endpoint_name }
default diameter dictionary
no diameter endpoint
default
Configures the default setting.
no
Removes the previous Diameter endpoint configuration.
diameter
Configures the Diameter interface.
dictionary standard
Configures the standard SGd dictionary.
endpoint endpoint_name
Enables Diameter to be used for accounting, and specifies which Diameter endpoint to use. endpoint_name must be an alphanumeric string of 1 through 63 characters.
Usage Guidelines
Use this command to configure the Diameter interface.
Example
diameter endpoint test