NCS 2015 Shelf Installation Acceptance Test

This chapter describes how to perform a shelf acceptance test on Cisco NCS 2015 shelf.

NTP-L60 Performing NCS 2015 Shelf Installation Acceptance Test

Purpose

Use this procedure to perform a shelf installation acceptance test for the NCS 2015 shelf.

Tools/Equipment

Voltmeter

Prerequisite Procedures

None

Required/As Needed

Required

Onsite/Remote

Onsite

Security Level

None

Procedure

Step 1

If you installed an NCS 2015 shelf, complete the table below by verifying that each applicable procedure was completed.

Table 1. NCS 2015 Shelf Installation Task Summary

Description

Completed

NTP-L41 Unpacking and Inspecting the Shelf

NTP-L47 Mounting NCS 2015 Shelf

Connect the chassis to the office ground. For detailed instructions on how to ground the chassis, refer to the Electrostatic Discharge and Grounding Guide for Cisco NCS 2000 Series .

NTP-L51 Opening and Removing the Door of the NCS 2015 Shelf

NTP-L53 Installing the Power Modules in NCS 2015 Shelf

NTP-L57 Installing Power and Ground to the NCS 2015 Shelf

NTP-L54 Installing Fan-Tray Assembly in NCS 2015 Shelf

DLP-L62 Installing the TNC, TNCE, TSC, TSCE, TNCS, or TNCS-O Card

NTP-L50 Installing Standard Door of NCS 2015 Shelf

Step 2

Complete the DLP-L63 Inspecting the Shelf.

Step 3

Continue with Connect the PC and Log into the GUI.

Stop. You have completed this procedure.