Ultra Cloud Core 5G Session Management Function, Release 2020.02 - Configuration and Administration Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: May 13, 2020

Chapter: 5G SMF Serviceability CLI Enhancements

5G SMF Serviceability CLI Enhancements
Feature Summary and Revision History
- Summary Data
- Revision History
Feature Description
show subscriber pei <imei>
show subscriber <gpsi>
show endpoint info

5G SMF Serviceability CLI Enhancements

Feature Summary and Revision History

Summary Data

Table 1. Summary Data
Applicable Product(s) or FunctionalArea	SMF
Applicable Platform(s)	SMI
Feature Default Setting	Enabled – Always-on
Related Changes in this Release	Not Applicable
Related Documentation	Not Applicable

Revision History

Table 2. Revision History
Revision Details	Release
First introduced.	2020.02.0

Feature Description

This chapter describes serviceability CLI enhancements to display the information about the deployed pods.

show subscriber pei <imei>

Table 3. show subscriber pei <imei>
Field	Description
policy	Specifies policy information.
ipv4-addr	Specifies IPv4 pool name.
dnn	Specifies DNN value.
pcf	Specifies PCF Address.
rat	Specifies RAT Type - nr/e-utran/wlan information.
connectivity	Specifies connectivity 4g/5g
ipv4-range	Specifies IPv4 address range.
chf	Specifies CHF address.
pei	Specifies Permanent Equipment Identifier.
udm	Specifies the UDM address.
upfEpKey	Specifies the UPF address EP key information.
ipv6-pfx	Specifies the IPv6 prefix information.
ipv6-pool	Specifies IPv6 Pool name.
chfGroupId	Specifies the CHF address group ID information.
gpsi	Specifies Generic Public Subscription Identifier.
pcfGroupId	Specifies PCF Address group ID.
upf	Specifies UPF Address.
ipv4-pool	Specifies IPv4 Pool name.
ipv6-range	Specifies IPv4 Address-Range.
amf	Specifies AMF address.
supi	Specify SUPI value.
access	Specifies access information.

show subscriber <gpsi>

Table 4. show subscriber pei <imei>
Field	Description
policy	Specifies policy information.
ipv4-addr	Specifies IPv4 pool name.
dnn	Specifies DNN value.
pcf	Specifies PCF Address.
rat	Specifies RAT Type - nr/e-utran/wlan information.
connectivity	Specifies connectivity 4g/5g
ipv4-range	Specifies IPv4 address range.
chf	Specifies CHF address.
pei	Specifies Permanent Equipment Identifier.
udm	Specifies the UDM address.
upfEpKey	Specifies the UPF address EP key information.
ipv6-pfx	Specifies the IPv6 prefix information.
ipv6-pool	Specifies IPv6 Pool name.
chfGroupId	Specifies the CHF address group ID information.
gpsi	Specifies Generic Public Subscription Identifier.
pcfGroupId	Specifies PCF Address group ID.
upf	Specifies UPF Address.
ipv4-pool	Specifies IPv4 Pool name.
ipv6-range	Specifies IPv4 Address-Range.
amf	Specifies AMF address.
supi	Specify SUPI value.
access	Specifies access information.

show endpoint info

Table 5. show endpoint info
Field	Description
endpoint	Specifies the Name of the endpoint.
address	Specifies Host and Port of endpoint.
type	Specifies type of endpoint.
status	Specifies current Status of endpoint.
interface	Specifies Interface name of endpoint.
internal	Specifies type of endpoint (Internal/External).
start Time	Specifies Start time of endpoint.
stop Time	Specifies Stop time of endpoint.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)