show user-plane-service

This chapter includes the show user-plane-service command output tables.

show user-plane-service statistics drop-counter

The output of the show user-plane-service statistics drop-counter command displays the following fields:

Field

Description

Packet Drop Data Statistics:

NAT packets processing failure:

NAT on demand handling

The total number of NAT packets failed due to on-demand handling.

IP allocation is in progress

The total number of NAT packets failed due to IP allocation in progress.

ICMP Packet translation

The total number of NAT packets failed due to ICMP packet translations.

FIREWALL packets processing failure:

Policy not found

The total number of Firewall packets failed due to missing policy.

No Matching GX rule found

The total number of Firewall packets failed due to unmatched Gx rules.

Flow apply action:

Discard

The total number of packets dropped due to discard action.

Readdress Failure

The total number of packets dropped due to readdress failure.

Packet exceeds the MTU size

The total number of packets dropped due to excess MTU size.

Failure in processing FAR Buffer packets

The total number of packets dropped due to failure in processing the FAR buffer.

FAR Apply Action Drop

The total number of packets dropped due to FAR apply action.

Traffic Steering Failure

The total number of packets dropped due to traffic steering failure.

QER Gate Status Closed

The total number of packets dropped due to QER gate status closure.

Content-filtering Discard Action

The total number of packets dropped due to content-filtering discard action.

IP Header Validation Failed

The total number of packets dropped due to IP header validation failure.

ADF level failure:

UL TEID/QFI key mismatch

The total number of packets dropped due to UL TEID/QFI key mismatch.

DL TFT mismatch

The total number of packets dropped due to DL TFT mismatch.

DL QFI mismatch

The total number of packets dropped due to DL QFI mismatch.

URL Blacklisting Discard Action

The total number of packets dropped due to URL blacklisting discard action.

DDN buffer overflow drop packets

The total number of packets dropped due to DDN buffer overflow.

APN AMBR Packets Drop

The total number of packets dropped due to APN AMBR.

ITC Packets Drop

The total number of ITC dropped packets.

ACL Drop

The total number of ACL dropped packets.

CC Dropped Packets

The total number of CC dropped packets.

FastPath Misc Drops:

Overload Protection

The total number of packets dropped due to overload protection.

Invalid Client

The total number of packets dropped due to invalid client.

Stream ID 0

The total number of packets dropped due to 0 stream ID.

Invalid Stream ID

The total number of packets dropped due to invalid stream ID.

OHR Mismatch Packet Drops

The total number of packets dropped due to outer header removal mismatch.

SGACL Packet Drops

Total number of SGACL packets dropped.

SGACL No Policy Packet Drops

Total number of SGACL packets not dropped.

No Default SGT cell Packet Drops

Total number of no default SGT cell packets dropped.

Note

 

This field is obsolete.

show user-plane-service all

The output of the show user-plane-service all command displays the following fields:

Field

Description

Service name

The name of the configured user plane service.

Service ID

The user plane service identifier.

Context

The context in which the service is configured.

Status

The status of the user plane service.

UPF Ingress GTPU Service

Displays the type of UPF Ingress GTPU Service.

UPF Ingress N3 Interface Type GTPU Service

Displays the type of UPF Ingress N3 Interface Type GTPU Service.

UPF Ingress N9 Interface Type GTPU Service

Displays the type of UPF Ingress N9 Interface Type GTPU Service.

UPF Ingress S5U Interface Type GTPU Service

Displays the type of UPF Ingress S5U Interface Type GTPU Service.

UPF Ingress S8U Interface Type GTPU Service

Displays the type of UPF Ingress S8U Interface Type GTPU Service.

UPF Egress GTPU Service

Displays the type of UPF Egress GTPU Service.

SGW Ingress GTPU Service

Displays the type of SGW Ingress GTPU Service.

SGW Egress GTPU Service

Displays the type of SGW Egress GTPU service.

Control Plane Tunnel GTPU Service

Displays the name of control plane tunnel GTPU service.

Sx Service

Displays the type of Sx Service.

Control Plane Group

Displays the type of control plane group.

Fast-Path service

Indicates the status of the fast-path service.

Load Control Parameters

Displays the Load Control related parameters.

Capacity

Displays the Load Control capacity.

NRF Management Service

Displays the name of Network Resource Functions (NRF) management service.

Nf-Instance-Id

Displays the value of Network function (NF) instance ID for NRF.

Session Priority Profile

Displays the name Session priority profile.

Ise Server Profile

Displays the name of the ISE server profile.

UPF Load Control Profile

Displays the load control profile name of the UPF.

UPF Overoad Control Profile

Displays the overload control profile name of the UPF.

show user-plane-service name

The output of the show user-plane-service name service_name command displays the following fields:

Field

Description

Service name

The name of the configured user plane service.

Service ID

The user plane service identifier.

Context

The context in which the service is configured.

Status

The status of the user plane service.

UPF Ingress GTPU Service

Displays the type of UPF Ingress GTPU Service.

UPF Ingress N3 Interface Type GTPU Service

Displays the type of UPF Ingress N3 Interface Type GTPU Service.

UPF Ingress N9 Interface Type GTPU Service

Displays the type of UPF Ingress N9 Interface Type GTPU Service.

UPF Ingress S5U Interface Type GTPU Service

Displays the type of UPF Ingress S5U Interface Type GTPU Service.

UPF Ingress S8U Interface Type GTPU Service

Displays the type of UPF Ingress S8U Interface Type GTPU Service.

UPF Egress GTPU Service

Displays the type of UPF Egress GTPU Service.

SGW Ingress GTPU Service

Displays the type of SGW Ingress GTPU Service.

SGW Egress GTPU Service

Displays the type of SGW Egress GTPU service.

Control Plane Tunnel GTPU Service

Displays the name of control plane tunnel GTPU service.

Sx Service

Displays the type of Sx Service.

Control Plane Group

Displays the type of control plane group.

Fast-Path service

Indicates the status of the fast-path service.

Load Control Parameters

Displays the Load Control related parameters.

Capacity

Displays the Load Control capacity.

NRF Management Service

Displays the name of Network Resource Functions (NRF) management service.

Nf-Instance-Id

Displays the value of Network function (NF) instance ID for NRF.

Session Priority Profile

Displays the name Session priority profile.

Ise Server Profile

Displays the name of the ISE server profile.

UPF Load Control Profile

Displays the UPF load control profile name.

UPF Overoad Control Profile

Displays the UPF overload control profile name.

show user-plane-service gtpu local-addresses

Table 1. show user-plane-service gtpu local-addresses Command Output Descriptions

Field

Description

Service Name

The name of the configured user plane service.

Address List

The IP addresses used to transmit/receive GTP-U packets.

GTPv1 Sessions

The number of active GTP-1 sessions.

show user-plane-service gtpu statistics local-address

Table 2. show user-plane-service gtpu statistics local-address table Command Output Descriptions
Field Description

Session Stats

Current

The total number of current sessions set up using GTPU service.

Current (IMS-media)

The total number of current (IMS-media) sessions set up using GTPU service

Total Setup

The total number of sessions set up using GTPU service.

Total Setup (IMS-media)

The total number of sessions set up (IMS-media) using GTPU service.

Current gtpu v0 sessions

The total number of current GTP-0 sessions.

Current gtpu v1 sessions

The total number of current GTP-1 sessions.

Total Data Stats

Uplink Packets

The total number of uplink packets.

Uplink Bytes

The total number of uplink bytes.

Downlink Packets

The total number of downlink packets.

Downlink Bytes

The total number of downlink bytes.

Packets Discarded

The total number of discarded packets.

Bytes Discarded

The total number of discarded bytes.

Uplink Packets (IMS-media)

The total number of uplink packets (IMS-media).

Uplink Bytes (IMS-media)

The total number of uplink bytes (IMS-media).

Downlink Packets (IMS-media)

The total number of downlink packets (IMS-media).

Downlink Bytes (IMS-media)

The total number of downlink bytes (IMS-media).

Packets Discarded (IMS-media)

The total number of discarded packets (IMS-media).

Bytes Discarded (IMS-media)

The total number of discarded bytes (IMS-media).

QoS Stats

Uplink Packets

The total number of QCI <n> uplink packets.

Uplink Bytes

The total number of QCI <n> uplink bytes.

Downlink Packets

The total number of QCI <n> downlink packets.

Downlink Bytes

The total number of QCI <n> downlink bytes.

Packets Discarded

The total number of discarded QCI <n> packets.

Non-Std QCI(Non-GBR)

Uplink Packets

The total number of non-standard QCI, non-GBR uplink packets.

Uplink Bytes

The total number of non-standard QCI, non-GBR uplink bytes.

Downlink Packets

The total number of non-standard QCI, non-GBR downlink packets.

Downlink Bytes

The total number of non-standard QCI, non-GBR downlink bytes.

Packets Discarded

The total number of discarded non-standard QCI, non-GBR packets.

Path Management Messages

Echo Request Rx

The total number of GTPU echo requests received.

Echo Response Rx

The total number of GTPU echo responses received.

Echo Request Tx

The total number of GTPU echo requests transmitted.

Echo Response Tx

The total number of GTPU echo responses transmitted.

SuppExtnHdr Tx

Total GTPU messages with supported extension headers transmitted.

Peer Stats

Total GTPU Peers

Total number of GTPU Peers available in the system.

Total GTPU Peers with Stats

The total number of GTPU Peers available in the system with statistics.

Tunnel Management Messages

Error Indication Tx

The number of Error Indication messages transmitted.

Error Indication Rx

The number of Error Indication messages received.

Error Indication Rx Discarded

The total number of error indications discarded.

show user-plane-service sgacl name sgacl-name

Table 3. show user-plane-service sgacl name Command Output Descriptions
Field Description
SGACL Name Displays the name of the Secure Group Tag-based Access Control List (SGACL).
SGACL Definitions Displays the ACL definitions.
protocol

Displays the protocol field for SGACL (IPV4, IPV6, or IP_AGNOSTIC.
Total SGACL(s) found Displays the total number of SGACLs found.

show user-plane-service sgt-column dsgt dsgt-value

Table 4. show user-plane-service sgt-column dsgt dsgt_value Command Output Descriptions
Field Description
D-SGT Displays the Destination SGT (D-SGT) value.
S-SGT Displays the Source SGT (S-SGT) value.
SGACL Name Version Displays the version of the SGACL name.

SGACL name

Displays the SGACL name.

Total SGT column(s) found

Displays the total number of the SGT columns.

show user-plane-service sgt-column summary

Table 5. show user-plane-service sgt-column summary Command Output Descriptions
Field Description
D-SGT Columns fetched Displays the fetched Destination SGT (D-SGT) columns.
D-SGT Version Displays the version of the D-SGT.

Total D-SGT column(s) found

Displays the total number of the D-SGT columns.

show user-plane-service s-nssai statistics [ all | id ]

The output of the show user-plane-service s-nssai statistics [ all | id ] command displays the following fields:

Field

Description

S-NSSAI

Indicates the S-NSSAI value.

Active Subscribers

Displays the number of active subscribers.

Total Subscribers

Displays the total number of subscribers.

show user-plane-service statistics all

The output of the show user-plane-service statistics all command displays the following fields:

Field

Description

UPF Overload Stats:

Current State

The current load or overload state of the UPF.

Overload Mode Count

The total number of times the UPF reached the overload condition.

Self-protection Mode Count

The total number of times the UPF reached the self-protection mode.

Last Detected Overload state

Timestamp of when UPF was last in the Overload state.

Last Detected Out-of Overload state

Timestamp of when UPF was last out of the Overload state.

Last Reported (System) Overload Factor

CPU

Timestamp of when UPF last reported overloaded based on CPU load.

Memory

Timestamp of when UPF last reported overloaded based on Memory load.

Session Capacity

Timestamp of when UPF last reported overloaded based on Session Capacity.

Last Reported (VPP CPU) Overload Factor

Timestamp of when UPF last reported overloaded based on CPU load.

Last Reported Reduction Metric

Timestamp of when UPF last reported reduction metric.

Session Stats:

Non-WPS Sx-Establishment reqs rcvd in Overload mode

The total number of times UPF received the WPS Session Establishment Request while in overload state.

Sx-Establishment reqs rejected in Self-protection mode

The total number of times UPF rejected the Sx Session Establishment Request while in self-protection mode.

Sx-Modification reqs rejected in Self-protection mode

The total number of times UPF rejected the Sx-Session Modification Request while in self-protection mode.

Sx-Sessions removed in Self-protection mode

The total number of sessions that are removed during self-protection mode.

WPS Sx-Establishment reqs allowed in Self-protection mode

The total number of times UPF allowed the WPS Session Establishment Request while in self-protection mode.

WPS Sx-Modification reqs allowed in Self-protection mode

The total number of times UPF allowed the WPS Session Modification Request while in self-protection mode.

Data Stats:

Overload Mode:

New non-WPS Flows (DROP state)

The total number of flows created in drop state while in overload condition.

New WPS-Session flows

The total number of new WPS flows allowed while in overload condition.

Total Packets dropped

The total number of packets dropped while in overload condition.

Self-Protection Mode:

New WPS-Session flows

The total number of new WPS flows allowed while in self-protection mode.

Total Packets dropped

The total number of packets dropped while in self-protection mode.

UPF Load Stats:

Current (system) Load Factor

CPU

The last reported load factor of the UPF based on CPU load.

Memory

The last reported load factor of the UPF based on Memory load.

Session Capacity

The last reported load factor of the UPF based on Session Capacity load.

Last reported sequence number

The last reported sequence number.

show user-plane-service statistics name

The output of the show user-plane-service statistics name command displays the following fields:

Field

Description

UPF Overload Stats:

Current State

The current load or overload state of the UPF.

Overload Mode Count

The total number of times the UPF reached the overload condition.

Self-protection Mode Count

The total number of times the UPF reached the self-protection mode.

Last Detected Overload state

Timestamp of when UPF was last in the Overload state.

Last Detected Out-of Overload state

Timestamp of when UPF was last out of the Overload state.

Last Reported (System) Overload Factor

CPU

Timestamp of when UPF last reported overloaded based on CPU load.

Memory

Timestamp of when UPF last reported overloaded based on Memory load.

Session Capacity

Timestamp of when UPF last reported overloaded based on Session Capacity.

Last Reported (VPP CPU) Overload Factor

Timestamp of when UPF last reported overloaded based on CPU load.

Last Reported Reduction Metric

Timestamp of when UPF last reported reduction metric.

Session Stats:

Non-WPS Sx-Establishment reqs rcvd in Overload mode

The total number of times UPF received the WPS Session Establishment Request while in overload state.

Sx-Establishment reqs rejected in Self-protection mode

The total number of times UPF rejected the Sx Session Establishment Request while in self-protection mode.

Sx-Modification reqs rejected in Self-protection mode

The total number of times UPF rejected the Sx-Session Modification Request while in self-protection mode.

Sx-Sessions removed in Self-protection mode

The total number of sessions that are removed during self-protection mode.

WPS Sx-Establishment reqs allowed in Self-protection mode

The total number of times UPF allowed the WPS Session Establishment Request while in self-protection mode.

WPS Sx-Modification reqs allowed in Self-protection mode

The total number of times UPF allowed the WPS Session Modification Request while in self-protection mode.

Data Stats:

Overload Mode:

New non-WPS Flows (DROP state)

The total number of flows created in drop state while in overload condition.

New WPS-Session flows

The total number of new WPS flows allowed while in overload condition.

Total Packets dropped

The total number of packets dropped while in overload condition.

Self-Protection Mode:

New WPS-Session flows

The total number of new WPS flows allowed while in self-protection mode.

Total Packets dropped

The total number of packets dropped while in self-protection mode.

UPF Load Stats:

Current (system) Load Factor

CPU

The last reported load factor of the UPF based on CPU load.

Memory

The last reported load factor of the UPF based on Memory load.

Session Capacity

The last reported load factor of the UPF based on Session Capacity load.

Last reported sequence number

The last reported sequence number.

show user-plane-service statistics charging-action [ name | all ]

The output of the show user-plane-service statistics charging-action [ name | all ] command displays the following fields:

Field

Description

X-Header Bytes Injected

Indicates the number of X-Header bytes injected.

X-Header Packets Injected

Indicates the number of X-Header packets injected.

X-Header Bytes Removed

Indicates the number of X-Header bytes removed.

X-Header Packets Removed

Indicates the number of X-Header packets removed.

show user-plane-service statistics rulebase [ name | all ]

The output of the show user-plane-service statistics rulebase [ name | all ] command displays the following header enrichment field:

Field

Description

HTTP header buffering limit reached

Indicates when the HTTP buffering limit is reached.

show user-plane-service statistics sgacl all

Table 6. show user-plane-service statistics sgacl all Command Output Descriptions
Field Description
ACL Name Specifies the name of the access control list.
Pkts-Down Specifies the total number of downlink packets for subscriber matching SGACL.
Bytes-Down Specifies the total number of downlink bytes for subscriber matching SGACL.
Pkts-Up Specifies the total number of dropped packets for subscriber matching SGACL.

Note

 

This field is added for as part of the CLI for completeness. However, the counters are always 0 as currently SGACL is applied only for downlink packets.

Bytes-Up

Specifies the total number of uplink bytes for a subscriber.

Note

 

This field is added for as part of the CLI for completeness. However, the counters are always 0 as currently SGACL is applied only for downlink packets.

Pkts dropped Specifies the total number of dropped packets.
Total SGACL(s) Specifies the total number of SGACLs for a subscriber.