show crypto

This chapter includes the show crypto command output tables.

show crypto group summary

Table 1. show crypto group summary Command Output Descriptions
Field Description

Crypto Group

Name of the crypto group

Primary Tunnel

Configuration information for the primary tunnel.

Secondary Tunnel

Configuration information for the secondary tunnel.

show crypto ikev2-ikesa security-associations summary

Table 2. show crypto ikev2-ikesa security-associations summary Command Output Descriptions
Field Description

Mgr ID

SA Manager ID number

VPN

SA VPN number

Local IPsec GW

Local default gateway IP address

Port

UDP port number

Remote IPSec GW

Remote default gateway IP address

Port

UDP port number

Hostname

Name of the remote gateway

State

Authentication state
  • I = Initiator

  • R = Responder

Lifetime/Remaining

Originally configured lifetime for the SA in seconds/number of seconds left in this lifetime.

show crypto ikev2-ikesa security-associations summary spi

Table 3. show crypto ikev2-ikesa security-associations summary spi Command Output Descriptions
Field Description

Local IPsec GW

Local default gateway IP address

Remote IPSec GW

Remote default gateway IP address

Initiator SPI

SPI (Security Parameter Index) of the Initiator

Responder SPI

SPI of the Responder

Lifetime

Originally configured lifetime for the SA in seconds/number of seconds left in this lifetime.

show crypto ipsec security-associations

Field Description

Map Name

The name of the crypto map facilitating the security association.

Local Address

The IP address of the interface on the security gateway facilitating the security association.

Current Peer

The IP address of the interface on the peer gateway facilitating the security association.

Peer Hostname

The name of the peer.

Crypto Type

The type of crypto map facilitating the security association, which can be:
  • Dynamic Map

  • IKEv1 Map

  • IKEv2 Map

  • Manual Map

SA State

The state of the security association, which can be:
  • Established

  • Partially Established

  • No SAs

IPSec Manager

The identifying number of the IPsec manager facilitating the security association.

Rekeying

The state of rekeying for the security association, which can be:
  • Enabled

  • Disabled

Redundancy Status

The state of the security association, which can be:
  • Original Tunnel: No failure has occurred.

  • Recovered Session: A failure has occurred and a recovered session has been created.

Allocated Address

The IP address allocated to the Network Access Identifiers (NAIs) of the users.

Phase 1

The NAI used in Phase 1 authentication.

Phase 2

The NAI used in Phase 2 authentication.

Encoded

The number of packets and bytes of data that have been encoded for the security association.

Encoded Errors

The number of errors that occurred while the packets were being encoded.

Decoded

The number of packets and bytes of data that have been decoded for the security association.

Decoded Errors

The number of errors that occurred while the packets were being decoded.

Authentication Errors

The number of errors that occurred during authentication.

Replay Errors

The number of replay errors that occurred.

Too short Errors

The number of too short errors that occurred.

IPSec SA

Diffie-Hellman Group

The number of the Diffie-Hellman group to which the security association belongs.

Outbound esp sas

spi

The Security Parameter Index (SPI) of the outbound ESP security association.

transform

hmac

The keyed-Hash Message Authentication Code used for the outbound ESP security association, which can be:
  • sha1-96

  • md5-96

cipher

The cipher used for the outbound ESP security association, which can be:
  • null

  • des

  • 3des

  • aes-cbc-128

  • aes-cbc-256

negotiated soft lifetime (kb/sec)

The soft lifetime in kilobits and/or seconds for the outbound ESP security association, created when a successful rekey has occurred. The soft lifetime is used to warn that the security association is about to expire, allowing the security gateway to create a new lifetime prior to the expiration of the hard lifetime.

remaining soft lifetime (kb/sec)

The remaining soft lifetime in kilobits and/or seconds.

negotiated hard lifetime (kb/sec)

The hard lifetime in kilobits and/or seconds for the outbound ESP security association. The hard lifetime is the number of kilobits and/or seconds used before the security association expires.

remaining hard lifetime (kb/sec)

The remaining hard lifetime in kilobits and/or seconds.

Encoded

The number of encoded packets and bytes of data for the outbound ESP security association.

Encoded Errors

The number of errors that occurred while the packets were being encoded.

Inbound esp sas

spi

The Security Parameter Index (SPI) of the inbound ESP security association.

transform

hmac

The keyed-Hash Message Authentication Code used for the inbound ESP security association, which can be:
  • sha1-96

  • md5-96

cipher

The cipher used for the inbound ESP security association, which can be:
  • null

  • des

  • 3des

  • aes-cbc-128

  • aes-cbc-256

negotiated soft lifetime (kb/sec)

The soft lifetime in kilobits and/or seconds for the inbound ESP security association, created when a successful rekey has occurred. The soft lifetime is used to warn that the security association is about to expire, allowing the security gateway to create a new lifetime prior to the expiration of the hard lifetime.

remaining soft lifetime (kb/sec)

The remaining soft lifetime in kilobits and/or seconds.

negotiated hard lifetime (kb/sec)

The hard lifetime in kilobits and/or seconds for the inbound ESP security association. The hard lifetime is the number of kilobits and/or seconds used before the security association expires.

remaining hard lifetime (kb/sec)

The remaining hard lifetime in kilobits and/or seconds.

Decoded

The number of packets and bytes of data that have been decoded for the inbound ESP security association.

Decoded Errors

The number of errors that occurred while the packets were being decoded.

Authentication Errors

The number of errors that occurred during authentication.

Replay Errors

The number of replay errors that occurred.

Too short Errors

The number of too short errors that occurred.

show crypto ipsec security-associations statistics

Table 4. show crypto ipsec security-associations statistics Command Output Descriptions
Field Description

Map Name

The name of the crypto map for which statistics are being displayed.

Application Map Name

The application map name that concatenates the following:
  • Application Supported: MIP or L2TP

  • Local Address: The IP address of the interface on the system facilitating the security association (SA).

  • Peer Address: The IP address of the peer security gateway facilitating the SA.

  • Traffic Type: Control, GRE encapsulated data, or IPIP (IP-in-IP) encapsulated data

NOTE: When a crypto map does not have any IPSec SAs established yet, i.e. No IKE negotiation has taken place OR the tunnel had been brought down after inactivity during the entire lifetime of the SAs, is marked as "Security Association is not established!"

local addr

The IP address of the interface on the system facilitating the security association (SA).

ACL

For ISAKMP or manual crypto maps, this is the name of the access control list (ACL) that is matched to the crypto map.

current peer

The IP address of the peer security gateway facilitating the SA.

Tunnel is keyed 1 times.

The number of times the tunnel was keyed. In this example, the tunnel was keyed once.

Encoded

The number of packets and bytes that have been encoded for the SA.

Encode Errors

The number of errors that have occurred while encoding packets.

Decoded

The number of packets and bytes that have been decoded for the SA.

Decode Errors

The number of errors that have occurred while decoding packets.

Authentication Errors

The number of errors that occurred during the system/security gateway authentication process.

Replay Errors

The number of replay errors that occurred for the SA.

outbound esp sas

spi

The outbound (from the system to the security gateway) security parameter index (SPI) used for the Encapsulating Security Payload protocol.

transform

The protocols configured for the transform set used by the crypto map for outbound tunnels.

negotiated soft lifetime (kb/sec)

The soft lifetime negotiated by the system and the security gateway for outbound SAs. The lifetime is measured in terms kilobytes (kb) and/or seconds (sec).

The soft lifetime is used to warn that the SA is about to expire allowing the systems to negotiate a new lifetime prior to the expiration of the hard lifetime.

remaining soft lifetime (kb/sec)

The amount of kilobytes and/or seconds remaining to the soft lifetime from what was initially negotiated.

negotiated hard lifetime (kb/sec)

The hard lifetime negotiated by the system and the security gateway for outbound SAs. The lifetime is measured in terms kilobytes (kb) and/or seconds (sec).

The hard lifetime that dictates the maximum duration for the SA before its termination.

remaining hard lifetime (kb/sec)

The amount of kilobytes and/or seconds remaining to the hard lifetime from what was initially negotiated.

Encoded

The number of packets and bytes that have been encoded for the SA.

Encode Errors

The number of errors that have occurred while encoding packets.

inbound esp sas

spi

The inbound (from the system to the security gateway) security parameter index (SPI) used for the Encapsulating Security Payload protocol.

transform

The protocols configured for the transform set used by the crypto map for inbound tunnels.

negotiated soft lifetime (kb/sec)

The soft lifetime negotiated by the system and the security gateway for inbound SAs. The lifetime is measured in terms kilobytes (kb) and/or seconds (sec).

The soft lifetime is used to warn that the SA is about to expire allowing the systems to negotiate a new lifetime prior to the expiration of the hard lifetime.

remaining soft lifetime (kb/sec)

The amount of kilobytes and/or seconds remaining to the soft lifetime from what was initially negotiated.

negotiated hard lifetime (kb/sec)

The hard lifetime negotiated by the system and the security gateway for inbound SAs. The lifetime is measured in terms kilobytes (kb) and/or seconds (sec).

The hard lifetime that dictates the maximum duration for the SA before its termination.

remaining hard lifetime (kb/sec)

The amount of kilobytes and/or seconds remaining to the hard lifetime from what was initially negotiated.

Decoded

The number of packets and bytes that have been decoded for the SA.

Decode Errors

The number of errors that have occurred while decoding packets.

Authentication Errors

The number of errors that occurred during the system/security gateway authentication process.

Replay Errors

The number of replay errors that occurred for the SA.

Too Short Errors

The number of too short errors that occurred for the SA.

ISAKMP sessions established for this tunnel

The total number of sessions successfully connected by this SA.

ISAKMP sessions failed for this tunnel

The total number of sessions that failed to be connected by this SA.

ISAKMP for this tunnel

NOTE: These items are displayed for the life of the ISAKMP SA.

Phase1 Completed as Responder

Indicates the state of the Phase 1 IPSec negotiation stage and role of the system (either responder or initiator).

Statistics

Displays statistics for the ISAKMP SA.

IN

The number of packets/bytes received.

OUT

The number of packets/bytes transmitted.

1 Phase2 negotiations

The number of negotiations that have taken place in Phase 2.

Negotiated Hard lifetime

The hard lifetime negotiated by the system and the security gateway for inbound SAs. The lifetime is measured in terms kilobytes (kb) and/or seconds (sec).

The hard lifetime that dictates the maximum duration for the SA before its termination.

show crypto ipsec security-associations summary

Table 5. show crypto ipsec security-associations summary Command Output Descriptions
Field Description

vvv

The first value (v) indicates the state of the security association (SA State), which can be:
  • E: Established

  • P: Partially Established

  • N: No SAs

The second value (v) indicates the state of rekeying (Rekey/Keepalive), which can be:
  • D: Rekey Disabled

  • E: Rekey Enabled/No Keepalive

  • K: Rekey Enabled/Keepalive

The third value (v) indicates the type of crypto map (Crypto Type) facilitating the security association, which can be:
  • D: Dynamic Map

  • I: IKEv1 Map

  • J: IKEv2 Map

  • M: Manual Map

Map Name

The name of the crypto map facilitating the security association.

Rekeys

The number of rekeys that occurred for the security association.

En Pkts

The number of packets that have been encrypted and transmitted over the security association.

De Pkts

The number of packets that have been received over the security association and decrypted.

show crypto isakmp keys

Table 6. show crypto isakmp keys Command Output Descriptions
Field Description

Peer IP Address

The IP address of the security gateway(s).

Preshared Key

The pre-shared key(s) (in Hex) exchanged by the security gateway.

show crypto isakmp security-associations

Table 7. show crypto isakmp security-associations Command Output Descriptions
Field Description

Local IPSec GW

The IP address of the local IPSec gateway.

Remote IPSec GW

The IP address of the remote IPSec gateway.

State

This displays the state of the SA.

The two letters at the beginning of the state define the IKE mode as follows:

  • MM - Main Mode

  • QM - Quick Mode

  • AM - Aggressive Mode

The letter in parentheses ( ) at the end of the state, describe where the state message was initiated as follows:

  • I - Initiator

  • R - Responder

Lifetime

The lifetime (time) the security association is active and amount of time remaining.

show crypto managers

Table 8. show crypto managers Command Output Descriptions
Field Description

Total IKEv2 Invalid-MsgId Notify Sent

An invalid KE Payload was received and the receiver sent back a NOTIFY payload to indicate this.

This is the number of times a NOTIFY payload was sent to indicate this error condition.

Total IKEv2 Invalid-MsgId Notify Received

A NOTFIY Payload was received indicating that the KE which had been previously sent to the peer was deemed invalid by the peer.

Total IKEv2 Invalid-KE Notify Sent

An IKE packet was received for which the message-id is invalid. A NOTIFY payload was sent to the peer to indicate that the received message-id was invalid.

This maintains the count of the number of times that such a NOTIFY payload was sen.t

Total IKEv2 Invalid-KE Notify Received

A NOTIFY payload was received indicating that the message-id which had been previously sent to the peer was deemed invalid by the peer.

Total IKEv2 No-Prop-Chosen Notify Sent

The receiver could not accept the protocol proposal which was sent. A NOTIFY payload was sent back to indicate this.

This maintains the count of the number of times such a NOTIFY payload was sent.

Total IKEv2 No-Prop-Chosen Notify Received

A NOTIFY payload was received indicating that the proposals which had been previously sent to the peer could not be accepted.

show crypto managers instance

Table 9. show crypto managers instance Command Output Descriptions
Field Description

IKEv2 DoS Cookie-Challenge Status

Denial of Service status.

  • On

  • Off

Certificate Information

For non-expired certificates:
  • Serial number: <string>

  • Monitoring Timer: Running

  • Status: Not Expired

  • Next Timer <datetime>

  • Expiry: <datetime>

For expired certificates
  • Serial number: <string>

  • Monitoring Timer: Stopped

  • Status: Expired

  • Next Timer: Not Scheduled

  • Expiry: <datetime>

IKEv2 Statistics

This displays the IKEv2 statistics for this manager instance

Current IKEv2 SAs

The total number of all IKEv2 SAs for this manager instance

Current half-open IKEv2 SAs

The number of IKEv2 SAs in half-open state for this manager instance

Current Connecting IKEv2 SAs

The number of IKEv2 SAs trying to connect for this manager instance

Current Established IKEv2 SAs

The number of established IKEv2 SAs for this manager instance

Internal Failure Sent

Indicates an internal failure in ipsecmgr or dcardmgr and a Notify message was sent to the peer.

show crypto managers summary

Table 10. show crypto managers summary Command Output Descriptions
Field Description

demux-stats

Display sessions demux statistics on each IPsec Manager.

distribution

Display IPsec Manager distribution info.

handoff-stats

Display IKE request handoff Statistics on each IPsec Manager.

ike-stats

Display IKE statistics on each IPsec Manager.

ikev2-stats

Display IKEv2 statistics on each IPsec Manager.

ipsec-sa-stats

Display IPsec SA statistics on each IPsec Manager.

show crypto map summary

Table 11. show crypto map summary Command Output Descriptions
Field Description

Total Crypto maps

The total number of crypto maps of all types.

Configured maps

The total number of configured crypto maps.

Service maps

The total number of service maps. There is one map per service.

Subscriber maps

The total number of subscriber maps.

Map Types

ipsec-dynamic

The total number of dynamic IPsec tunnel crypto maps.

ipsec-l2tp

The total number of L2TP IPsec tunnel crypto maps.

ipsec-ikev1

The total number of IKEv1 IPsec tunnel crypto maps.

ipsec-manual

The total number of manual (static) IPsec tunnel crypto maps.

ipsec-ikev2-subscriber

The total number of IKEv2 subscriber tunnel crypto maps.

ipsec-mobile-ip

The total number of mobile IP IPsec tunnel crypto maps.

IKEv2 SA

Cipher null

The total number of IKEv2 security associations using the block cipher NULL. All IKEv2 security association protected traffic is sent in the clear.

Cipher des

The total number of IKEv2 security associations using the block cipher Data Encryption Standard in Cypher Block Chaining (CBC) mode.

Cipher 3des

The total number of IKEv2 security associations using the block cipher Triple Data Encryption Standard in Cypher Block Chaining (CBC) mode.

Cipher aes-cbc-128

The total number of IKEv2 security associations using the block cipher Advanced Encryption Standard with a 128-bit key in Cypher Block Chaining (CBC) mode.

Cipher aes-cbc-256

The total number of IKEv2 security associations using the block cipher Advanced Encryption Standard with a 256-bit key in Cypher Block Chaining (CBC) mode.

PRF sha1

The total number of IKEv2 security associations using the IKE pseudo-random function (PRF) with the cryptographic hash function Secure Hash Algorithm-1.

PRF md5

The total number of IKEv2 security associations using the IKE pseudo-random function (PRF) with the cryptographic hash function Message Digest 5.

HMAC sha1

The total number of IKEv2 security associations using a keyed-Hash Message Authentication Code (HMAC) with the cryptographic hash function Secure Hash Algorithm-1 truncated to 96 bits.

HMAC md5

The total number of IKEv2 security associations using a keyed-Hash Message Authentication Code (HMAC) with the cryptographic hash function Message Digest 5 truncated to 96 bits.

DH Group 1

The total number of IKEv2 security associations using Diffie-Hellman Group 1 security (the lowest security level). DH Group 1 provides 768 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 2

The total number of IKEv2 security associations using Diffie-Hellman Group 2 security. DH Group 2 (the default) provides 1024 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 5

The total number of IKEv2 security associations using Diffie-Hellman Group 5 security. DH Group 5 provides 1536 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 14

The total number of IKEv2 security associations using Diffie-Hellman Group 14 security (the highest security level). DH Group 14 provides 2048 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

IPSec SA

Protocol esp

The total number of IPsec security associations using Encapsulating Security Payload (ESP) protocol.

Protocol ah

The total number of IPsec security associations using Authentication Header (AH) protocol.

Cipher null

The total number of IPsec security associations using the block cipher NULL. All IKEv2 IPsec security association derived traffic is sent in the clear.

Cipher des

The total number of IPsec security associations using the block cipher Data Encryption Standard in Cypher Block Chaining (CBC) mode.

Cipher 3des

The total number of IPsec security associations using the block cipher Triple Data Encryption Standard in Cypher Block Chaining (CBC) mode.

Cipher aes-cbc-128

The total number of IPsec security associations using the block cipher Advanced Encryption Standard with a 128-bit key in Cypher Block Chaining (CBC) mode.

Cipher aes-cbc-256

The total number of IPsec security associations using the block cipher Advanced Encryption Standard with a 256-bit key in Cypher Block Chaining (CBC) mode.

HMAC sha1-96

The total number of IPsec security associations using a keyed-Hash Message Authentication Code (HMAC) with the cryptographic hash function Secure Hash Algorithm-1 truncated to 96 bits (the default).

HMAC md5-96

The total number of IPsec security associations using a keyed-Hash Message Authentication Code (HMAC) with the cryptographic hash function Message Digest 5 truncated to 96 bits.

DH Group 1

The total number of IPsec security associations using Diffie-Hellman Group 1 security (the lowest security level). DH Group 1 provides 768 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 2

The total number of IPsec security associations using Diffie-Hellman Group 2 security. DH Group 2 (the default) provides 1024 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 5

The total number of IPsec security associations using Diffie-Hellman Group 5 security. DH Group 5 provides 1536 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 14

The total number of IPsec security associations using Diffie-Hellman Group 14 security (the highest security level). DH Group 14 provides 2048 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

show crypto statistics

Table 12. show crypto statistics Command Output Descriptions
Field Description

Combined ipsec statistics for context <context-name>

The name of the system context for which statistics are displayed.

Transmit Statistics

ESP Encode

The total number of packets and bytes that were transmitted having been encoded for the SA using the Encapsulating Security Payload (ESP) protocol.

AH Encode

The total number of packets and bytes that were transmitted having been encoded for the SA using the Authentication Header (AH) protocol.

Transmit Error Counters

Encode Packets

The total number of packets which have errors while encoding.

Encode Bytes

The total number of bytes which have errors while encoding.

Receive Statistics

ESP Decode

The total number of packets and bytes that were received having been encoded for the SA using the Encapsulating Security Payload (ESP) protocol.

AH Decode

The total number of packets and bytes that were received having been encoded for the SA using the Authentication Header (AH) protocol.

Receive Error Counters

Decode Packets

The total number of packets which have errors while decoding.

Decode Bytes

The total number of bytes which have errors while encoding.

Replay Packets

The total number of packets which have been replayed.

Replay Bytes

The total number of bytes which have been replayed.

Combined Control Statistics for Context

The name of the system context for which statistics are displayed.

IKE Flow Counts

IKE Gateway Flows

The number of UDP flows, incremented when UDP flows are allocated and decremented when UDP flows are freed.

IKE Session Flows

The number of cookie flows, incremented when cookie flows are allocated and decremented when cookie flows are freed.

Transmit Statistics

IKE Packets

The total number of total IKE packets transmitted.

Receive Statistics

IKE Packets Received

The total number of IKE packets received.

New IKE Req

The total number of IKE packets sent for new IKE requests.

Gateway Flow Packets

The total number of UDP flow packets received.

Session Flow Packets

The total number of cookie flow packets received.

Rekey Statistics

IKE Rekeys

The total number of times the IKE SAs negotiated during phase 1 of the IPSec negotiation have been rekeyed. This field is for IKEv1 only and it will be 0 for IKEv2.

Dead Peer Detection (DPD) Statistics

Req Sent

The total number of DPD R-U-THERE packets sent.

Rsp Rcvd

The total number of DPD R-U-THERE-ACK packets received.

Req Rcvd

The total number of DPD R-U-THERE packets received.

Rsp Sent

The total number of DPD R-U-THERE-ACK packets sent.

Disconnects

The total number of DPD disconnects that occurred between the peers.

Timeouts

The total number of ISAKMP DPD protocol messages that have exceeded their configured timeout period.

NAT-T Statistics

Keepalives Sent

The total number of NATT keepalive packets sent.

Keepalives Rcvd

The total number of NATT keepalive packets received.

Detailed IKE Statistics

Active IKE SAs

The total number of SAs:
  • Initiated

  • Responded.

Total IKE SAs

The total number of SAs (cumulative history):
  • Initiated

  • Responded.

Total Attempts

The total cumulative attempts made to establish SAs:
  • Initiated

  • Responded.

Total IKE SA Deletes

  • Req Sent

  • Rsp Rcvd

  • Req Rcvd

  • Rsp Sent

Total Packets In

The total cumulative IKE packets received.

Total Packets Out

The total cumulative IKE packets sent.

Total Octets In

The total cumulative IKE octets received.

Total Octets Out

The total cumulative IKE octets sent.

Establishment Failure Statistics

Initiation Neg Error

The total number of initiated negotiations that failed because of errors.

Initiation Neg Time Out

The total number of initiated negotiations that failed because of timeouts (no response).

Response Neg Error

The total number of responded negotiations that failed because of errors.

Congestion Reject

The total number of packets which were rejected due to congestion control.

Congestion Drop

The total number of packets which were dropped due to congestion control.

Total Cookie Error

Total errors in cookie challenge. Refer to the detailed counters in IKEv2 section.

Total Auth Failures

Total errors due to authentication failures during IKE_AUTH exchanges.

IKEv2 Statistics

Current state:

  • Current IKEv2 SAs
  • Current half-open IKEv2 SAs
  • Current connecting IKEv2 SAs
  • Current established IKEv2 SAs
  • Current child SAs

IKEv2 Timer Stats

  • Total IKESA Retrans expirations
  • Total IKESA Setup expirations (no exchange)
  • Total IKESA Setup expirations
  • Total IKESA Lifetime (soft) expirations
  • Total IKESA Lifetime (hard) expirations
  • Total TSELSA Lifetime (soft) expirations
  • Total TSELSA Lifetime (hard) expirations

IKEv2 Exchanges dropped

  • Total IKEv2 Resp Pkts Drop - No IKESA
  • Total invalid resp
  • Total non-init exch drop--no IKESA
  • Total invalid message ID
  • Total invalid major version
  • Total IKESA error
  • Total unknown critical payload

IKEv2 Cookie Statistics

  • Total cookie notify packets sent
  • Total cookie notify packets received
  • Total cookie notify match
  • Total cookie notify not match

IKEv2 Rekey Statistics

  • Total IKESA Rekey sent
  • Total IKESA Rekey received
  • Total IKESA Rekey ignored
  • Total ChildSA Rekey sent
  • Total ChildSA Rekey received
  • Total ChildSA Rekey ignored

IKEv2 MOBIKE Statistics

  • Total MOBIKE notify sent
  • Total MOBIKE received
  • Total Mobike ignored

IKEv2 Misc Statistics

  • Total SA create failure
  • Total SA flow operation failure
  • Total NAT Keepalive received
  • Total Invalid-KE notify sent
  • Total Invalid-KE notify received
  • Total Invalid-msgID notify received
  • Total No-Prop-Chosen notify sent
  • Total No-Prop-Chosen notify received

IKEv2 Exchange Decode failure statistics

  • Total pkts failure
  • Total internal errors
  • Total invalid IP HDR
  • Total invalid UDR HDR
  • Total invalid IKE HDR
  • Total invalid IKE HDR payload
  • Total invalid IKE HDR MJ ver
  • Total invalid IKE HDR MN ver
  • Total invalid IKE HDR exchange type
  • Total invalid IKE HDR Rsvd flag
  • Total invalid IKE HDR length
  • Total invalid payload syntax
  • Total invalid payload len
  • Total unknown crit payload
  • Total too many payloads
  • Total invalid SA payload len
  • Total invalid SA proposal HDR
  • Total invalid SA proposal HDR Reserved
  • Total too many transforms
  • Total invalid SA proposal HDR len
  • Total too many proposals
  • Total invalid protocol ID
  • Total invalid first SA proposal num
  • Total invalid SA proposal num
  • Total invalid transform len
  • Total invalid transform HDR
  • Total invalid transform HDR Rsvd
  • Total invalid transform type
  • Total invalid transform ID

IKEv2 Exchange Decode failure statistics (continued)

  • Total invalid KE payload len
  • Total invalid KE DH Group len
  • Total invalid ID payload type
  • Total invalid ID payload len
  • Total invalid KE DH group
  • Total invalid KE DH groups
  • Total invalid Transform ID
  • Total invalid auth payload len
  • Total invalid nonce payload len
  • Total invalid notify payload len
  • Total invalid notify payload SPI size
  • Total Invalid Notify payload Proto ID
  • Total invalid notify payload NATT
  • Total invalid notify payload Cookie
  • Total Invalid notify payload Rekey
  • Total invalid notify payload NATT
  • Total invalid notify payload Cookie
  • Total invalid notify payload Rekey
  • Total invalid EAP payload len
  • Total invalid CP payload len
  • Total invalid CP payload attr len
  • Total invalid payload unknown attr
  • Total invalid Encrypted Payload len
  • Total invalid TS payload len
  • Total invalid TS payload Rsvd
  • Total invalid TS payload TS-type
  • Total unsupported crit payload
  • Total unsupported cert payload
  • Total unsupported Auth method

IKEv2 Exchange Decode failure statistics (continued)

  • Total unsupported SA payload Prot AH
  • Total unsupported Notify Prot AH
  • Total unsupported payload Crit VID
  • Total unsupported TS payload TS_Type
  • Total unsupported method
  • Total unknown error

IKEv2 Decrypt Failure statistics

  • Total Pkts failure
  • Total HMAC mismatch
  • Total pad length error

IKEv2 Xchg statistics

  • Total Bad Msg ID
  • Total bad response
  • Total stale message ID
  • Total unknown error
  • Total state lookup failure

show crypto statistics ikev2

Table 13. show crypto statistics IKEv2 Command Output Descriptions
Field Description

Flow Counts

Current UDP flows

The total number of UDP port based flows in the data path.

Current Cookie flows

The total number of cookie challenge based flows in the data path.

Transmit Statistics

IKE Packets

The total number of total IKE packets transmitted.

Receive Statistics

IKE Packets Received

The total number of IKE packets received.

New IKE Requests

The total number of IKE packets sent for new IKE requests.

UDP flow Packets

The total number of packets that matched the UDP flow.

Cookie flow Packets

The total number of packets that matched the cookie flow.

Rekey Statistics

IKE Rekeys

The total number of successful IKE_SA rekeys.

Dead Peer Detection (DPD) Statistics

Requests sent

The total number of DPD R-U-THERE packets sent.

Replies received

The total number of DPD R-U-THERE-ACK packets received.

Requests received

The total number of DPD R-U-THERE packets received.

Replies sent

The total number of DPD R-U-THERE-ACK packets sent.

Collisions

The total number of events that IKEv2 keepalive exchanges occur simultaneously from the PDIF and the MS.

Disconnects

The total number of DPD disconnects that occurred between the peers.

Timeouts

The total number of DPD protocol messages that have exceeded their configured timeout period.

NAT-T Statistics

Keepalives sent

The total number of NAT-T keepalive packets sent.

Detailed IKE Statistics

Active IKE SAs

The total number of IKE SAs.

Initiated

The total number of the active SAs initiated locally.

Responded

The total number of the active SAs responded.

Total IKE SAs so far

The total number of SAs (cumulative history).

Initiated

The total cumulative IKE SAs initiated locally.

Responded

The total cumulative IKE SAs responded to.

Total attempts so far

The total cumulative attempts made to establish SAs.

Initiated

The total number of SA establishment attempts initiated locally.

Responded

The total number of SA establishment attempts responded to.

Total deletes so far

The total cumulative deletes so far.

Requests received

The total number of requests received.

Requests sent

The total number of requests sent.

Replies received

The total number of replies received.

Replies sent

The total number of replies sent.

Total packets in

The total cumulative IKEv2 packets received.

Total packets out

The total cumulative IKEv2 packets sent.

Total octets in

The total cumulative IKEv2 octets received.

Total octets out

The total cumulative IKEv2 octets sent.

Failed initiated negotiations with errors

The total number of initiated negotiations that failed because of errors.

Failed initiated negotiations with time out:

The total number of initiated negotiations that failed because of timeouts (no response).

Failed responded negotiations with errors

The total number of responded negotiations that failed because of errors.

Total cookie errors

The total number of cookie errors encountered.

Congestion rejects

The total number of packets rejected due to congestion.

Congestion drops

The total number of packets dropped due to congestion.

Total Unknown Exchange SPI

The total number of unknown exchange SPIs.

IKEv2 Detail Statistics

Current State

Current IKEv2 SAs

The number of current IKEv2 SAs.

Current Half-Open IKEv2 SAs

The number of IKEv2 SAs in a half-open state.

Current Connecting IKEv2 SAs

The number of IKEv2 SAs currently connecting.

Current Established IKEv2 SAs

The number of established IKEv2 SAs.

Current Child SAs

The number of current child SAs.

Total IKEv2 Timer Statistics

IKESA Retrans Expirations

The total number of retransmission expirations.

IKESA Setup Expirations (no Xchg)

The number of IKESA setups that expired with no exchange.

IKESA Setup Expirations

The total number of IKESA Session setups expired.

IKESA Lifetime (Soft) Expirations

The number of IKESA soft lifetime timer expirations.

IKESA Lifetime (Hard) Expirations

The number of IKESA hard lifetime timer expirations.

CHILD_SA Setup Expirations (no Xchg)

The number of Child SA setups that expired with no exchange.

CHILD_SA Lifetime (Soft) Expirations

The number of Child SA soft lifetime timer expirations.

CHILD_SA Lifetime (Hard) Expirations

The number of Child SA hard lifetime timer expirations.

Total IKEv2 Multiple Authentication Statistics

Phase 1 Auth Successes

The number of multi-auth Phase 1 EAP authentication successes.

Phase 1 Auth Failures

The number of multi-auth Phase 1 EAP authentication failures.

Phase 1 Auth Req Sent

The number of multi-auth Phase 1 EAP authentication requests sent.

Phase 1 Auth Resp Rcvd

The number of multi-auth Phase 1 EAP authentication responses received.

Phase 2 Auth Successes

The number of multi-auth Phase 2 EAP authentication successes.

Phase 2 Auth Failures

The number of multi-auth Phase 2 EAP authentication failures.

Phase 2 Auth Req Sent

The number of multi-auth Phase 2 EAP authentication requests sent.

Phase 2 Auth Resp Rcvd

The number of multi-auth Phase 2 EAP authentication responses received.

Phase 2 Auth MD5 Successes

The number of multi-auth Phase 2 EAP authentication with MD5 successes.

Phase 2 Auth MD5 Failures

The number of multi-auth Phase 2 EAP authentication with MD5 failures.

Phase 2 Auth GTC Successes

The number of multi-auth Phase 2 EAP authentication with GTC mode successes.

Phase 2 Auth GTC Failures

The number of multi-auth Phase 2 EAP authentication with GTC mode failures.

Hash match failures

The number of hash match failures.

Signing failures

The number of signing failures.

MSK missing at phase 1 comp

The number of EAP Master Session Keys (MSK) not found.

Miss Another Auth Follows

The number of missed authentications that follow.

Total IKEv2 Exchanges Dropped

Resp Pkts Drop - No IKESA

The number of IKEv2 response packets dropped without an IKEv2 SA being created.

Invalid Resp

The total number of invalid response messages.

Non-Init Exch Drop - No IKESA

The total number of IKEv2 exchanges dropped without an IKEv2 SA being created.

Invalid MSG ID

The total number of sessions dropped due to packets with invalid MSG ID.

Invalid Major Version

The total number of sessions dropped due to packets with invalid major version.

IKESA error

The total number of IKESA error messages.

Unknown Crit Payload

The total number of unknown critical payload messages.

Retransmitted request

IKEV2 Stack does not process the packets in the order they are received. New packets are queued if any packet is under processing. After completing the processing, stack consider processing the packets queue first instead of taking the latest packet received from network directly and leaving the packets in queue for later. And if any message is received with same message ID which is currently under processing, then that message will be discarded as retransmitted message received. The count for such request is 'Retransmitted Request'.

Total IKEv2 Notify Statistics

Cookie Notify Sent

The total number of IKEv2 Denial of Service (DoS) cookie notify packets sent.

Cookie Notify Received

The total number of IKEv2 DoS cookie notify packets received.

Cookie Notify Match

The total number of IKEv2 DoS cookie notify messages that match.

Cookie Notify Not Match

The total number of IKEv2 DoS cookie notify messages that do not match.

Multi Auth Supported

The total number of multiple authentications supported.

Another Auth Follows

The total number of authentications that follow.

PDN Type IPv4 Sent

Displays the status of the IPv4 PDN type sent.

PDN Type IPv6 Sent

Displays the status of the IPv6 PDN type sent.

Total IKEv2 Rekey Statistics

IKESA Rekey Sent

The total number of IKESA Rekey Request messages sent.

IKESA Rekey Rcvd

The total number of IKESA Rekey Request messages received.

IKESA Rekey Ignored

The total number of IKESA Rekey messages ignored.

ChildSA Rekey Req Sent

The total number of Child SA Rekey Request messages sent.

ChildSA Rekey Req Rcvd

The total number of Child SA Rekey Request messages received.

ChildSA Rekey Rsp Sent

The total number of Child SA Rekey Response messages sent.

ChildSA Rekey Rsp Rcvd

The total number of Child SA Rekey Response messages received.

ChildSA Rekey Ignored

The total number of Child SA Rekey messages ignored.

Total IKEv2 MOBIKE Statistics

MOBIKE Notify Sent

The total number of MOBIKE notify messages sent.

MOBIKE is not supported. All MOBIKE messages are treated as if they were never received.

MOBIKE Recvd

The total number of MOBIKE packets received.

MOBIKE Ignored

The total number of MOBIKE packets dropped.

Total IKEv2 Misc Statistics

SA Create Failure

The total number of SA creations failed.

SA Flow Operation Failure

The total number of SA flow operations failed.

Total IKEv2 Notify Payload Sent Statistics

Invalid KE Payload

The total number of IKEv2 NOTIFY payloads sent of the NOTIFY type Invalid KE Payload.

Invalid Major Version

The total number of IKEv2 NOTIFY payloads sent of the NOTIFY type Invalid Major Version.

Invalid Message ID

The total number of IKEv2 NOTIFY payloads sent of the NOTIFY type Invalid Message ID.

Invalid Syntax

The total number of IKEv2 NOTIFY payloads sent of the NOTIFY type Invalid Syntax.

No Additional SAs

The total number of IKEv2 NOTIFY payloads sent of the NOTIFY type No Additional SAs.

No Proposal Chosen

The total number of IKEv2 NOTIFY payloads sent of the NOTIFY type No Proposal Chosen.

TS Unacceptable

The total number of IKEv2 NOTIFY payloads sent of the NOTIFY type TS Unacceptable.

Unsupported Critical Payload

The total number of IKEv2 NOTIFY payloads sent of the NOTIFY type Unsupported Critical Payload.

Internal Failure Sent

The total number of IKEv2 NOTIFY payloads sent of the NOTIFY type Internal Failure Sent.

Total IKEv2 Notify Payload Received Statistics

Invalid KE Payload

The total number of IKEv2 NOTIFY payloads received of the NOTIFY type Invalid KE Payload.

Invalid Major Version

The total number of IKEv2 NOTIFY payloads received of the NOTIFY type Invalid Major Version.

Invalid Message ID

The total number of IKEv2 NOTIFY payloads received of the NOTIFY type Invalid Message ID.

Invalid Syntax

The total number of IKEv2 NOTIFY payloads received of the NOTIFY type Invalid Syntax.

No Additional SAs

The total number of IKEv2 NOTIFY payloads received of the NOTIFY type No Additional SAs.

No Proposal Chosen

The total number of IKEv2 NOTIFY payloads received of the NOTIFY type No Proposal Chosen.

TS Unacceptable

The total number of IKEv2 NOTIFY payloads received of the NOTIFY type TS Unacceptable.

Unsupported Critical Payload

The total number of IKEv2 NOTIFY payloads received of the NOTIFY type Unsupported Critical Payload.

IKEv2 Exchange Decode Failure Statistics

Packet Failures

The number of IKEv2 packets that fail to decode.

Internal Errors

The total number of failures due to internal errors.

Invalid IP HDR

The total number of failures due to an invalid IP header.

Invalid UDP HDR

The total number of failures due to an invalid UDP header.

Invalid IKE HDR

The total number of failures due to an invalid IKE header.

Invalid IKE HDR Payload

The total number of failures due to an invalid IKE header payload.

Invalid IKE HDR Init SPI

The total number of failures due to an invalid IKE header initiator security parameter index.

Invalid IKE HDR Resp SPI

The total number of failures due to an invalid IKE header responder security parameter index.

Invalid IKE HDR Major Ver

The total number of failures due to an invalid IKE header major version.

Invalid IKE HDR Minor Ver

The total number of failures due to an invalid IKE header minor version.

Invalid IKE HDR Xchg Type

The total number of failures due to an invalid IKE header exchange type.

Invalid IKE HDR Rcvd Flag

The total number of failures due to an invalid IKE header received flags.

Invalid IKE HDR Len

The total number of failures due to an invalid IKE header length.

Invalid Syntax

The total number of failures due to an invalid syntax.

Invalid Payload Syntax

The total number of failures due to an invalid payload syntax.

Invalid Payload Len

The total number of failures due to an invalid payload length.

Unknown Crit Payload

The total number of failures due to an unknown critical payload.

Too many payloads

The total number of failures due to many payloads.

Invalid SA Payload Len

The total number of failures due to an invalid SA payload length.

Invalid SA Proposal HDR

The total number of failures due to an invalid SA proposal header.

Invalid SA Proposal HDR Rcvd

The total number of failures due to an invalid SA proposal header received.

Too many transforms

The total number of failures due to many transform-sets in the SA payload.

Invalid SA Proposal HDR Len

The total number of failures due to an invalid SA proposal header length.

Too many proposals

The total number of failures due to many proposals in SA payload.

Invalid first SA Proposal num

The total number of failures due to an invalid first SA proposal number.

Invalid SA Proposal ID

The total number of failures due to an invalid Protocol ID in SA payload.

Invalid SA Proposal num

The total number of failures due to an invalid SA proposal number.

Invalid Transform Len

The total number of failures due to an invalid transform-set length.

Invalid Transform HDR

The total number of failures due to an invalid transform-set header.

Invalid Transform HDR Rcvd

The total number of failures due to an invalid transform-set header received.

Invalid Transform Type

The total number of failures due to an invalid transform-set type.

Invalid Transform ID

The total number of failures due to an invalid transform-set ID.

Invalid KE Payload Len

The total number of failures due to an invalid key exchange payload length.

Invalid KE DH Group

The total number of failures due to an invalid key exchange Diffie-Hellman group number.

Invalid KE DH Group Len

The total number of failures due to an invalid ID payload length.

Invalid ID Pld Len

The total number of failures due to an invalid ID payload length.

Invalid ID Pld Type

The total number of failures due to an invalid ID payload type.

Invalid ID Pld Data

The total number of packets for which ID payload syntax validation has failed.

Invalid Auth Pld Len

The total number of failures due to an invalid authorization payload length.

Invalid Nonce Payload Len

The total number of failures due to an invalid nonce payload length.

Invalid Notify Payload Len

The total number of failures due to an invalid notify payload length.

Invalid Notify Payload SPI Len

The total number of failures due to an invalid notify payload security parameter index size.

Invalid Notify Payload NAT

The total number of failures due to an invalid notify payload Network Address Translation-Traversal.

Invalid Notify payload Proto Id

The total number of failures due to an invalid notify payload protocol ID.

Invalid EAP Payload len

The total number of failures due to an invalid Encapsulation Authentication Protocol payload length.

Invalid Notify Payload Rekey

The total number of failures due to an invalid notify payload rekey.

Invalid CP Payload len

The total number of failures due to an invalid CP payload length.

Invalid Notify Payload Cookie

The total number of failures due to an invalid notify payload cookie.

Invalid TS Payload len

The total number of failures due to an invalid transform-set payload length.

Invalid CP Payload Attr Len

The total number of failures due to an invalid CP payload unknown attribute length.

Invalid TS Payload Rcvd

The total number of failures due to an invalid transform-set payload received.

Invalid Encrypted Payload Len

The total number of failures due to an invalid encrypted payload length.

Invalid TS payload TS-Type

The total number of failures due to an invalid transform-set payload transform-set type.

Unsupported Crit Payload

The total number of failures due to an unsupported critical payload.

Unsupported Cert Payload

The total number of failures due to an unsupported certified payload.

Unsupported Notify Prot AH

The total number of failures due to an unsupported notify payload protocol Authentication Header.

Unsupported Auth method

The total number of failures due to an unsupported authentication method.

Unsupported Payload Crit VID

The total number of failures due to an unsupported payload critical V-LAN ID.

Unsupported method

The total number of failures due to an unsupported method.

Unknown Error

The total number of failures due to an unknown error.

Unsupported SA Payload Prot AH

The total number of failures due to an unsupported SA payload protocol Authentication Header.

Unsupported TS payload TS-Num

The total number of failures due to an unsupported transform-set payload number.

Unsupported TS Payload TS-Type

The total number of failures due to an unsupported transform-set payload transform-set-type.

Unsupported TS Payload TS-Prot

The total number of failures due to an unsupported transform-set payload protocol.

Unsupported CP Payload No IP Attr

The total number of failures due to an invalid CP because of no available IP attribute.

Invalid CP Payload UNK ATTR

The total number of failures due to an invalid CP because of an unknown attribute.

Total IKEv2 Decrypt Failure Statistics

Packets Failure

The total number of session failures due to packets that failed to decrypt.

HMAC mismatch

The total number of session failures due to a HMAC mismatch.

Pad length error

The total number of failures due to a pad length error in the packet.

Total IKEv2 Xchg Statistics

Bad Msg Id

The total number of session failures due to a bad message ID.

Bad Response

The total number of session failures due to a bad response.

Stale Msg ID

The total number of session failures due to a stale message ID.

Unknown error

The total number of session failures due to unknown errors.

Stale Lookup Failure

The total number of session failures due to a stale lookup failure.

Combined Crypto map Statistics

Current Tunnels

The number of tunnels currently connected by the SA.

Current Tunnels Established

The number of tunnels successfully connected by the SA.

IKE Fails

The total number of tunnels that failed to be connected by the SA.

Total Tunnels

The total number of tunnels connected by the SA.

Total Tunnels Established

The total number of tunnels successfully connected by the SA.

Call Req Rejects

The total number of call request reject messages.

IKEv2 Authentication Failures Statistics

No DEA message

The total number of non DEA messages.

Missing AVP in DEA

The total number of missing AVPs in the DEA message.

Invalid APN

The total number of invalid APNs.

Key mismatch

The total number of key mismatches in the authentication vectors.

Invalid result code or AVP in DEA

The total number of invalid result code or AVP in the DEA message.

Invalid NAI format

The total number of invalid NAI formats.

APN validation failed

The total number of failed APN validations.

Misc. auth failures

The total number of miscellaneous authentication failures.

show crypto template summary

Table 14. show crypto template summary Command Output Descriptions
Field Description

Total Crypto maps

Configured maps

The total number of crypto maps configured in this context.

Service maps

The total number of service maps. There is one map per service.

Subscriber maps

The total number of subscriber maps.

Map Types:

ipsec-dynamic

The total number of dynamic IPsec tunnel crypto maps.

ipsec-ikev1

The total number of IKEv1 IPsec tunnel crypto maps.

ipsec-ikev1pst-subscr

The total number of IKEv1 PST subscriber tunnel maps.

ipsec-ikev2

The total number of IKEv2 subscriber tunnel crypto maps.

ipsec-ikev2-subscriber

The total number of IKEv2 subscriber tunnel crypto maps.

ipsec-l2tp

The total number of L2TP IPsec tunnel crypto maps.

ipsec-manual

The total number of manual (static) IPsec tunnel crypto maps.

ipsec-mobile-ip

The total number of mobile IP IPsec tunnel crypto maps.

IKEv2 SA:

Cipher 3des

The total number of IKEv2 security associations using the block cipher Triple Data Encryption Standard in Cypher Block Chaining (CBC) mode.

Cipher aes-cbc-128

The total number of IKEv2 security associations using the block cipher Advanced Encryption Standard with a 128-bit key in Cypher Block Chaining (CBC) mode.

Cipher aes-cbc-256

The total number of IKEv2 security associations using the block cipher Advanced Encryption Standard with a 256-bit key in Cypher Block Chaining (CBC) mode.

Cipher des

The total number of IKEv2 security associations using the block cipher Data Encryption Standard in Cypher Block Chaining (CBC) mode.

Cipher null

The total number of IKEv2 security associations using the block cipher NULL. All IKEv2 security association protected traffic is sent in the clear.

DH Group 1

The total number of IKEv2 security associations using Diffie-Hellman Group 1 security (the lowest security level). DH Group 1 provides 768 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 2

The total number of IKEv2 security associations using Diffie-Hellman Group 2 security. DH Group 2 (the default) provides 1024 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 5

The total number of IKEv2 security associations using Diffie-Hellman Group 5 security. DH Group 5 provides 1536 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 14

The total number of IKEv2 security associations using Diffie-Hellman Group 14 security (the highest security level). DH Group 14 provides 2048 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

HMAC aes-xcbc-96

The total number of IPsec security associations using a keyed-Hash Message Authentication Code (HMAC) using the AES block cipher with a block size of 128 bits.

HMAC md5-96

The total number of IPsec security associations using a keyed-Hash Message Authentication Code (HMAC) with the cryptographic hash function Message Digest 5 truncated to 96 bits.

HMAC sha2-256-128

The total number of IPsec security associations using a keyed-Hash Message Authentication Code (HMAC) in conjunction with the SHA-256 algorithm truncated to 128 bits.

HMAC sha2-384-192

The total number of IPsec security associations using a keyed-Hash Message Authentication Code (HMAC) in conjunction with the SHA-384 algorithm truncated to 192 bits.

HMAC sha2-512-256

The total number of IPsec security associations using a keyed-Hash Message Authentication Code (HMAC) in conjunction with the SHA-512 algorithm truncated to 256 bits.

PRF sha1

The total number of IKEv2 security associations using the IKE pseudo-random function (PRF) with the cryptographic hash function Secure Hash Algorithm-1.

PRF aes-xcbc-128

The total number of IKEv2 security associations using the IKE pseudo-random function (PRF) in conjunction with Advanced Encryption Standard (AES) with a key length restriction of 128 bits.

PRF md5

The total number of IKEv2 security associations using the IKE pseudo-random function (PRF) with the cryptographic hash function Message Digest 5.

PRF sha2-256

The total number of IKEv2 security associations using the IKE pseudo-random function (PRF) using the SHA-2 algorithm truncated to 256 bits.

PRF sha2-384

The total number of IKEv2 security associations using the IKE pseudo-random function (PRF) using the SHA-2 algorithm truncated to 384 bits.

PRF sha2-512

The total number of IKEv2 security associations using the IKE pseudo-random function (PRF) using the SHA-2 algorithm truncated to 512 bits.

IPSec SA

Protocol esp

The total number of IPsec security associations using Encapsulating Security Payload (ESP) protocol.

Protocol ah

The total number of IPsec security associations using Authentication Header (AH) protocol.

Cipher 3des

The total number of IKEv2 security associations using the block cipher Triple Data Encryption Standard in Cypher Block Chaining (CBC) mode.

Cipher aes-cbc-129

The total number of IKEv2 security associations using the block cipher Advanced Encryption Standard with a 129-bit key in Cypher Block Chaining (CBC) mode.

Cipher aes-cbc-256

The total number of IKEv2 security associations using the block cipher Advanced Encryption Standard with a 256-bit key in Cypher Block Chaining (CBC) mode.

Cipher des

The total number of IKEv2 security associations using the block cipher Data Encryption Standard in Cypher Block Chaining (CBC) mode.

Cipher null

The total number of IKEv2 security associations using the block cipher NULL. All IKEv2 security association protected traffic is sent in the clear.

DH Group 1

The total number of IKEv2 security associations using Diffie-Hellman Group 1 security (the lowest security level). DH Group 1 provides 768 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 2

The total number of IKEv2 security associations using Diffie-Hellman Group 2 security. DH Group 2 (the default) provides 1024 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 5

The total number of IKEv2 security associations using Diffie-Hellman Group 5 security. DH Group 5 provides 1536 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

DH Group 14

The total number of IKEv2 security associations using Diffie-Hellman Group 14 security (the highest security level). DH Group 14 provides 2048 bits of key exchange cryptographic strength.

This is a modular exponential (MODP) DH group.

HMAC aes-xcbc-96

The total number of IPsec security associations using a keyed-Hash Message Authentication Code (HMAC) using the AES block cipher with a block size of 128 bits.

HMAC md5-96

The total number of IPsec security associations using a keyed-Hash Message Authentication Code (HMAC) with the cryptographic hash function Message Digest 5 truncated to 96 bits.

HMAC sha1-96

The total number of IPsec security associations using a keyed-Hash Message Authentication Code (HMAC) with the cryptographic hash function Secure Hash Algorithm-1 truncated to 96 bits (the default).