show cloud

This chapter includes the show cloud command output tables.

The show cloud commands are only supported on virtualized platforms.

show cloud configuration

Table 1. show cloud configuration Command Output Descriptions
Field Description
Card <n> Card slot number.
Config Disk Parameters Information about the current virtual disk configuration.
Local Params:
CARDSLOT= Card slot number.
CARDTYPE= Hexadecimal card type identifier.
CPUID= Associated CPU number.

IFTASK_CORES=50

Core allocation on the SF card.

IFTASK_CRYPTO_CORES=30

Core allocation for crypto on the SF card.

IFTASK_MCDMA_CORES=40

Core allocation for mcdma on the SF card.

CONTROL_THREAD_ENABLE=1

Control thread enabled.

MCDMA_THREAD_DISABLE=1

MCDMA thread disabled.

show cloud hardware

Table 2. show cloud hardware Command Output Descriptions
Field Description

CPU Nodes

Number of CPU nodes.

CPU Cores/Threads

Number of cores/threads.

Memory

vMemory in Megabytes.

Hugepage size

Page size.

cpeth0:

VPC-DI network communication port.

Driver

Driver type.

loeth0:

CF only: LOCAL management port (Console).

Driver

Driver type.

portslot_port

SF only: Service port.

Driver

Driver type.

show cloud monitor

Table 3. show cloud monitor di-network summary Command Output Descriptions
Field Description
The following fields appear for both summary and detail command options.
Card <n> Test Results Card slot number on which monitoring has been performed.
ToCard Slot number of the card to which traffic was routed.

Health

"Bad" indicates a packet loss rate of larger than 1%. Otherwise the Health is "Good".

5MinLoss

Percentage of packets lost for the past five minutes.

60MinLoss

Percentage of packets lost for the past 60 minutes.

The following fields only appear for the detail command option.

Dest

The reported statistics refer to the communication between this card and the card number specified when running the command.

TotalPkt

Total number of packets sent.

JumboPkt

Number of jumbo packets sent.

TotalDrops

Total number of jumbo and non-jumbo test packets that were dropped.

JumboDrops

Number of jumbo test packets that were dropped.

LongRTT

Longest Round Trip Time (RTT) in milliseconds.

AverageRTT

Average Round Trip Time (RTT) in milliseconds.

Last 10 RTT in milliseconds (starting from most current)

Table 4. show cloud monitor controlplane and dataplane Command Output Descriptions
Field Description

Cards

Indicates the card slot number that originated the monitoring request.

Src

Indicates the card slot number that originated the monitoring request.

Dst

Indicates the card slot number to which the request was directed.

15 Second Interval / 5 Minute Interval / 60 Minute Interval (Control Plane only)

Xmit

Indicates the total number of packets transmitted for a 15-second interval.

Recv

Indicates the total number of packets received for a 15-second interval.

Miss%

Indicates the drop/lost percentage. If insufficient data is collected for a complete interval, “-incomplete” is displayed.

15 Second Interval / 5 Minute Interval / 60 Minute Interval (Data Plane only)

Miss

Indicates the difference in the number of packets transmitted versus the number of packets received

Hit

Indicates the total number of packets received for a 15-second interval.

Pct

Indicates the drop/lost percentage. If insufficient data is collected for a complete interval, “-incomplete” is displayed.