| MMEMGR
|
The MME
manager instance where the SGs service is running.
|
| MME Reset
|
A
system-wide parameter which is set to "Yes" when the MME service ( and SGS
service) is up or after the MME restarts after a failure. This is a restoration
indicator at MME service.
|
| Service ID
|
The system
generated identification number of the SGs service.
|
| Peer ID
|
The system
generated identification number of the VLR's SCTP connection.
|
| VLR Name
|
The VLR name
as configured in the SGs service.
|
| SGS Service Name
|
The
configured SGs service name.
|
| VLR Offload
|
Displays if
the VLR is configured/marked for offload state.
|
| SGS Service Address
|
The IP
address of the interface to which the SGs service is bound.
|
| SGS Service Port
|
The port
number of the interface to which the SGs service is bound.
|
| VLR IP Address (es)
|
The VLR IP
address as configured in the SGs service. If multi-homing is configured, both
addresses will be shown. The path status for each is displayed as either UP or
DOWN.
|
| VLR Port
|
The VLR port
number as configured in the SGs service.
|
| Assoc State
|
The current
state of the SCTP association, either UP or DOWN.
|
|
Assoc Uptime
|
The total
amount of time ( hours | minutes | seconds) the current SCTP association has
been active (up).
The format
of Assoc UpTime is 0000d00h00m (where d= day, h=hour, m=minutes) when h >
=24 hrs, otherwise it will be displayed as 00h00m00s.
|
| Assoc State Up Count
|
The total
number of times the SCTP association has come up.
|
| VLR Failure Detach
|
Indicates if
the
sgs vlr-failure
Exec Mode command is enabled (Yes) or disabled (No).
Detach
Count: The total number of subscribers that have already been detached as a
result of the sgs vlr-failure command.
Total:
Indicates the total number of subscribers that have to be detached.
Note:
This field is
not
displayed when the
vlr-recover
Config Mode command is enabled.
|
| SGs Service Configured VLR Failure
|
Indicates if
the SGs service
vlr-recover
Config Mode command is enabled (Yes) or disabled (No).
Detach
Count: The total number of subscribers that have already been detached as a
result of the SGs Service VLR Failure feature.
Total:
Indicates the total number of subscribers that have to be detached.
Note: This field is only
displayed when the SGs Service VLR Failure feature has been configured.
|
| VLR Recover Detach
|
Indicates if
the
sgs vlr-recover
Exec Mode command is enabled (Yes) or disabled (No).
Detach
Count: The total number of subscribers that have already been detached as a
result of the sgs vlr-recover command.
Total:
Indicates the total number of subscribers that have to be detached.
|
|
SGS-AP Statistics
|
| Tx
|
The total number of messages transmitted by this service for the
associated message type.
|
| ReTx
|
The total number of messages retransmitted by this service for
the associated message type.
|
| Rx
|
The total number of messages received by this service for the
associated message type.
|
| Paging Request
|
The total number of paging request messages.
|
| Paging Reject
|
The total number of paging reject messages.
|
| Service Request
|
The total number of service request messages.
|
| Downlink Unitdata
|
The total number of downlink unit data messages.
|
| Uplink Unitdata
|
The total number of uplink unit data messages.
|
| Location Update Request
|
The total number of Location Update Request messages.
|
| Location Update Accept
|
The total number of Location Update Accept messages.
|
| Location Update Reject
|
The total number of Location Update Reject messages.
|
| Location Update Timeout
|
The total
number of Location Update Request messages not received from HSS/MSC due to
ts6-1 timeout.
Note that
only the Rx counter will increment. Tx and ReTx counters are not supported.
|
| TMSI Reallocation Complete
|
The total number of TMSI reallocation complete messages.
|
| Alert Request
|
The total number of alert request messages.
|
| Alert Ack
|
The total number of alert ack messages.
|
| Alert Reject
|
The total number of alert reject messages.
|
| UE Activity Indication
|
The total number of UE activity indication messages.
|
| EPS Detach Indication
|
The total number of EPS detach indication messages.
|
| EPS Detach Ack
|
The total number of EPS detach ack messages.
|
| IMSI Detach Indication
|
The total number of IMSI detach indication messages.
|
| IMSI Detach Ack
|
The total number of IMSI detach ack messages.
|
| Reset Indication
|
This
statistic has been deprecated.
|
| Reset Ack
|
This
statistic has been deprecated.
|
| MM Information Request
|
The total number of MM information request messages.
|
| Release Request
|
The total number of release request messages.
|
| Status
|
The total number of status messages.
|
| UE Unreachable
|
The total number of UE unreachable messages.
|
| Service Abort Request
|
The total number of SGsAP-SERVICE-ABORT-REQUEST messages.
|
| Unknown MSG
|
The total number of unknown messages.
|
|
Flow debug stats for VLR address index :
Each of the following statistics is only displayed if the
stat's value is non-zero. These stats are typically used for debugging.
|
|
NPU Flow created for Primary IPA
|
The total number of NPU Flow created for Primary IPA.
|
|
NPU Flow created for Secondary IPA
|
The total number of NPU Flow created for Secondary IPA.
|
|
Primary IPA flow add requests sent
|
The total number of Primary IPA flow add requests sent.
|
|
Secondary IPA flow add requests sent
|
The total number of Secondary IPA flow add requests sent.
|
|
Primary IPA flow add success received
|
The total number of Primary IPA flow add success received.
|
|
Secondary IPA flow add success received
|
The total number of Secondary IPA flow add success received.
|
|
Primary IPA flow add failed
|
The total number of Primary IPA flow add failed.
|
|
Secondary IPA flow add failed
|
The total number of Secondary IPA flow add failed.
|
|
Primary IPA flow alloc failed
|
The total number of Primary IPA flow alloc failed.
|
|
Secondary IPA flow alloc failed
|
The total number of Secondary IPA flow alloc failed .
|
|
Primary IPA flow insert failed
|
The total number of Primary IPA flow insert failed.
|
|
Secondary IPA flow insert failed
|
The total number of Secondary IPA flow insert failed.
|
|
Primary IPA flow delete requests sent
|
The total number of Primary IPA flow delete requests sent.
|
|
Secondary IPA flow delete requests sent
|
The total number of Secondary IPA flow delete requests sent.
|
|
Primary IPA flow delete success
|
The total number of Primary IPA flow delete success.
|
|
Secondary IPA flow delete success
|
The total number of Secondary IPA flow delete success .
|
|
Primary IPA flow delete failed
|
The total number of Primary IPA flow delete failed .
|
|
Secondary IPA flow delete failed
|
The total number of Secondary IPA flow delete failed.
|
|
Primary IPA flow delete no match
|
The total number of Primary IPA flow delete no match.
|
|
Secondary IPA flow delete no match
|
The total number of Secondary IPA flow delete no match.
|
|
Primary IPA invalid flowid
|
The total number of Primary IPA invalid flowid.
|
|
Secondary IPA invalid flowid
|
The total number of Secondary IPA invalid flowid.
|
|
Primary IPA invalid NPU response
|
The total number of Primary IPA invalid NPU response.
|
|
Secondary IPA invalid NPU response
|
The total number of Secondary IPA invalid NPU response.
|
|
Max per VLR associations reached
|
The total number of Max per VLR associations reached .
|
|
Invalid NPU response codes
|
The total number of Invalid NPU response codes .
|
|
Primary IPA flow resp code[%s] count
|
The total number of Primary IPA flow resp code[%s] count.
|
|
Secondary IPA flow resp code[%s] count
|
The total number of Secondary IPA flow resp code[%s] count.
|
| Total VLRs
|
The total number of VLRs configured in the SGs service.
|
Feedback