show sls-service all
Field | Description |
---|---|
Service name |
The configured SLs service name. |
Service id |
The system generated identification number of the SLs service. |
Context |
The name of the context in which SLs service is configured. |
Status |
Status of this SLs service. |
Bind |
Indicates whether the service is bound to an interface.: Done or None. |
SLs-MME IP Address |
The IP address(es) configured for this SLs service. |
SCTP Port |
The source port number for SCTP communications. |
T-3x01 (Low Delay) |
The number of seconds configured for the T-3x01 (Low Delay) timer, which defines the number of seconds the MME waits for a "low delay" response from the E-SMLC. |
T-3x01 (Delay Tolerant) |
The number of seconds configured for the T-3x01 (Delay Tolerant) timer, which defines the number of seconds the MME waits for a "delay tolerant" response from the E-SMLC. |
T-3x02 |
The number of seconds configured for the T-3x02 timer. The T-3x02 timer is started on the MME when the MME sends a RESET REQUEST to the E-SMLC. Once the T3x02 timer expires, the MME can resend the RESET REQUEST to the E-SMLC. |
Max Re-Transmission |
The configured maximum number of times the MME will resend a RESET REQUEST to the ESMLC. |
SCTP Param Template Associated |
Displays the name of the SCTP Parameter Template associated with the service. Note: If no SCTP Parameter Template has been associated with this SLs Service, this output field and all the following SCTP fields are not shown. |
SCTP Alpha |
Displays the SCTP Retransmission Timeout (RTO) alpha value as configured in the SCTP Parameter Template. |
SCTP Beta |
Displays the SCTP Retransmission Timeout (RTO) beta value as configured in the SCTP Parameter Template. |
SCTP Checksum Type |
Displays the SCTP checksum type as configured in the SCTP Parameter Template. |
SCTP Valid Cookie Lifetime |
Displays the SCTP cookie lifetime value as configured in the SCTP Parameter Template. |
SCTP Max Assoc Retrans |
Displays the maximum number of retransmissions for SCTP associations value as configured in the SCTP Parameter Template. |
SCTP Max Number of In Streams |
Displays the maximum number of incoming streams for SCTP value as configured in the SCTP Parameter Template. |
SCTP Init Retransmissions |
Displays the maximum number of retransmissions for SCTP initiations value as configured in the SCTP Parameter Template. |
SCTP Max MTU |
Displays the maximum Maximum Transmission Unit (MTU) size for SCTP value as configured in the SCTP Parameter Template. |
SCTP Max Number of Out Streams |
Displays the maximum number of outgoing streams for SCTP value as configured in the SCTP Parameter Template. |
SCTP Path Retransmissions |
Displays the maximum number of retransmissions for SCTP paths value as configured in the SCTP Parameter Template. |
SCTP Min MTU |
Displays the minimum Maximum Transmission Unit (MTU) size for SCTP value as configured in the SCTP Parameter Template. |
SCTP RTO Initial |
Displays the initial time for SCTP Retransmission Timeout (RTO) value as configured in the SCTP Parameter Template. |
SCTP RTO Max |
Displays the maximum time for SCTP Retransmission Timeout (RTO) value as configured in the SCTP Parameter Template. |
SCTP RTO Min |
Displays the minimum time for SCTP Retransmission Timeout (RTO) value as configured in the SCTP Parameter Template |
SCTP Sack Frequency |
Displays the frequency for SCTP Selective Acknowledgement value as configured in the SCTP Parameter Template. |
SCTP Sack Period |
Displays the period of time for SCTP Selective Acknowledgement value as configured in the SCTP Parameter Template. |
SCTP Start MTU |
Displays the initial Maximum Transmission Unit (MTU) size for SCTP value as configured in the SCTP Parameter Template. |
SCTP Heartbeat Status |
Displays the SCTP heartbeat status as configured in the SCTP Parameter Template. |
SCTP HeartBeat Timer |
Displays the SCTP heartbeat timer value as configured in the SCTP Parameter Template. |
SCTP Bundle Status |
Displays the SCTP data chunk bundle status as configured in the SCTP Parameter Template. |
SCTP Bundle Timer |
Displays the SCTP data chunk bundle timer value as configured in the SCTP Parameter Template. |
SCTP Alternate Accept Flag |
Displays the SCTP additional lifetime accept flag status as configured in the SCTP Parameter Template. |