show pcc-service

This chapter describes the output of the show pcc-service command.

show pcc-service all

Table 1. show pcc-service all Command Output Description
Field Description

Service name

Indicates the name of the PCC service for which counters are displayed.

Context name

Indicates the name of the context in which the PCC service is configured and running.

Charging-Method

Indicates the charging methods communicated to PCEF at command level for this PCC service.

Possible methods are:
  • None
  • Offline
  • Online
  • Offline and Online
By default "None" is the enabled option.

Online Charging-Server(s)

This group displays information of online charging servers (primary and secondary) configured and used in this PCC service.

Primary

Indicates the name of the primary online charging server configured and used in this PCC service.

Secondary

Indicates the name of the secondary online charging server configured and used in this PCC service.

Offline Charging-Server(s)

This group displays information of offline charging servers (primary and secondary) configured and used in this PCC service.

Primary

Indicates the name of the primary offline charging server configured and used in this PCC service.

Secondary

Indicates the name of the secondary offline charging server configured and used in this PCC service.

Subscriber-Profile Refresh Interval (sec)

Indicates the interval duration in seconds after which Subscriber profile is refreshed from SSC/SPR in a PCC service.

Multiple PCEF Per Subscriber

Indicates status of support for more than one Gx-session for single subscriber session coming from multiple PCEF in this PCC service instance. By default this feature is enabled.

Setup Timeout

Indicates IPCF setup timeout duration set on a system for setup timer. Possible range of duration is 1 to 120 in seconds.

By default Setup timeout value is 60 seconds.

Special value of 0 indicates that timer is disabled.

Idle Timeout

Indicates the idle session timeout duration set for a subscriber session timer. Possible range of duration is 1 to 4294967295 in seconds.

Special value of 0 indicates that timer is disabled and it is the default behavior.

It also displays the action configured for initiation when idle timer expires. Possible actions are:
  • None
  • Reauthorization of session.
  • Disconnection of session if reauthorization of session fails.

Long-duration Timeout

Indicates the long duration idle session timeout set for a subscriber session timer. Possible range of duration is 1 to 4294967295 in seconds.

Special value of 0 indicates that timer is disabled and it is the default behavior.

It also displays the action configured for initiation when long duration timeout timer expires. Possible actions are:
  • None
  • Detection of idle session and sending of SNMP traps or CORBA notification.
  • Detection of idle session and then disconnect the session after sending of SNMP traps or CORBA notification

show pcc-service session all

Table 2. show pcc-service session all Command Output Descriptions
Field Description

vvvv

Displays service and session state information. This column provides a code consisting of four characters.

From left-to-right, the first character represents the Session State that the subscriber is using. The possible call types are:
  • c: Closed
  • C: Connected
  • D: Disconnected
  • o: Open
  • S: Waiting on SPR
  • r: Waiting on DREG
  • s: Waiting on STR
  • e: Waiting on deallocate
  • t: Waiting on CCR-T
  • A: Waiting on ASR
  • R: Waiting on RAR

From left-to-right, the second character represents the Gx Session Count. It indicates the total number of Gx sessions between PCEF and IPCF active in this session.

From left-to-right, the third character represents the Gy Session Count. It indicates the total number of Gy sessions active in this session.

From left-to-right, the second character represents the Gxa Session Count. It indicates the total number of Gx sessions between PCEF (eHRPD) and IPCF active in this session.

CALLID

Indicates the IP-CAN session subscriber's call identification number.

IMSI/MSID

Indicates the IP-CAN session subscriber's IMSI/MSID number used in this session in bindmux.

User Name

Indicates the user name used in IP-CAN session to identify the subscriber in this session in bindmux. This is typically used in IP-CAN session between PDSN and IPCF/PCRF over Gx interface.

Total number of PCC sessions

The total number of PCC sessions on chassis including all modes.

show pcc-service session full

Table 3. show pcc-service session full Command Output Descriptions
Field Description

CALLID

Indicates the IP-CAN session subscriber's call identification number.

IMSI/MSID

Indicates the IP-CAN session subscriber's IMSI/MSID number used in this session in bindmux.

User Name

Indicates the user name used in IP-CAN session to identify the subscriber in this session in bindmux. This is typically used in IP-CAN session between PDSN and IPCF/PCRF over Gx interface.

Profile Name

Indicates the name of the subscriber used in IP-CAN session to provide QoS parameters.

Default-EPS-Bearer

Indicates whether default EPS bearer is provisioned for subscriber in IP-CAN session for which information is displayed

APN-AMBR

Indicates whether an Aggregate Maximum Bit Rate (AMBR) associated with APN is provisioned for subscriber in IP-CAN session for which information is displayed.

Authorized QCIs

This group displays the parameters for authorized Quality Class Identifiers (QCIs) used in IP-CAN session for which information is displayed.

QCI

Indicates the Quality Class Identifier (QCI) authorized and used in IP-CAN session for which information is displayed.

Uplink

Indicates the uplink bit rate provisioned in authorized QCI for IP-CAN session for which information is displayed.

Downlink

Indicates the downlink bit rate provisioned in authorized QCI for IP-CAN session for which information is displayed.

Total Predefined Rules

Indicates the total predefined Rules applicable for IP-CAN session for which information is displayed.

Predefined Rules

Indicates the name of the predefined Rules, if applicable, for IP-CAN session for which information is displayed.

Rule Status

Indicates the status of the predefined Rules, if applicable, for IP-CAN session for which information is displayed.

Possible status are:
  • Active
  • Inactive
  • Temporarily Active

Rule Failure Code

Indicates the predefined Rule failure codes, if applicable, for IP-CAN session for which information is displayed.

Possible failure codes are:
  • Out-of-credit
  • Reallocation-of-credit
  • Unknown rule name
  • Invalid Rating Group
  • Invalid Service Identifier
  • GW/PCEF Malfunction
  • Limited Resources
  • Max No. of Bearers Reached
  • Unknown Bearer Id
  • Missing Bearer Id
  • Missing Flow Description
  • Resource Allocation Failure
  • QoS Validation Failure

Rule Activation Time

Indicates the time configured to activate predefined Rule for IP-CAN session for which information is displayed.

Rule deactivation Time

Indicates the time configured to deactivate predefined Rule for IP-CAN session for which information is displayed.

Total Dynamic Rules

Indicates the total dynamic Rules applicable for IP-CAN session for which information is displayed.

Dynamic Rules

Indicates the name of the dynamic Rules, if applicable, for IP-CAN session for which information is displayed.

Rating-Group

Indicates the rating group configured to the dynamic Rules, if applicable, for IP-CAN session for which information is displayed.

Precedence

Indicates the precedence configured to the dynamic Rules, if applicable, for IP-CAN session for which information is displayed.

Gate Status

Indicates the status of the Gate configured to the dynamic Rules, if applicable, for IP-CAN session for which information is displayed.

QoS Profile

Indicates the QoS profile configured to the dynamic Rules, if applicable, for IP-CAN session for which information is displayed.

Flow

Indicates the total number of flows applicable for IP-CAN session for which information is displayed.

AF Information

Indicates the Application Function information for dynamic Rules, if applicable, for IP-CAN session for which information is displayed.

Rule Status

Indicates the status of the predefined Rules, if applicable, for IP-CAN session for which information is displayed.

Possible status are:
  • Active
  • Inactive
  • Temporarily Active

Rule Failure Code

Indicates the predefined Rule failure codes, if applicable, for IP-CAN session for which information is displayed.

Possible failure codes are:
  • Out-of-credit
  • Reallocation-of-credit
  • Unknown rule name
  • Invalid Rating Group
  • Invalid Service Identifier
  • GW/PCEF Malfunction
  • Limited Resources
  • Max No. of Bearers Reached
  • Unknown Bearer Id
  • Missing Bearer Id
  • Missing Flow Description
  • Resource Allocation Failure
  • QoS Validation Failure

Rule Activation Time

Indicates the time configured to activate dynamic Rule for IP-CAN session for which information is displayed.

Rule deactivation Time

Indicates the time configured to deactivate dynamic Rule for IP-CAN session for which information is displayed.

Quota Information

This group displays the Quota related information applicable for IP-CAN session for which information is displayed.

Usage Monitor Information

Indicates the Usage Monitor status applicable for IP-CAN session for which information is displayed.

Total number of PCC sessions

The total number of PCC sessions on chassis including all modes.

show pcc-service statistics

Table 4. show pcc-service statistics Command Output Description
Field Description

Service name

Indicates the name of the PCC service for which counters are displayed.

Total Gx req processed

Indicates the total number of Gx request messages from PCEF processed by PCC-service node.

Total Gy req processed

Indicates the total number of Gy request messages from OCS processed by PCC-service node.

Total SSC req processed

Indicates the total number of request messages from SSC/SPR processed by PCC-service node.

Total Unknown requests

Indicates the total number of unknown type of request messages from network nodes received by PCC-service node.

PUR Updates

Indicates the total number of Profile-Update-Request update messages from network nodes received at PCC-service node.

SNR Updates

Indicates the total number of Subscribe-Notifications-Request update messages from network nodes received at PCC-service node.

PNR Updates

Indicates the total number of Push-Notifications-Request update messages from network nodes received at PCC-service node.

Total Profile Hits

Indicates the total number of Subscribe profiles accessed by PCC-service node.

Total Profile Miss

Indicates the total number of Subscribe profiles missed by PCC-service node.

Total Quota Reports

Indicates the total number of quota reports processed by PCC-service node.

Total Unknown rating-groups

Indicates the total number of unknown type of rating groups received by PCC-service node.

Total Rules Activated

Indicates the total number of Rules at PCEF activated by PCC-service node.

Total Rules Deactivated

Indicates the total number of Rules at PCEF deactivated by PCC-service node.

Total Rulebases Activated

Indicates the total number of Rulebases at PCEF activated by PCC-service node.

Total Rulebases Deactivated

Indicates the total number of Rulebases at PCEF deactivated by PCC-service node.

Total Rules Installed

Indicates the total number of Rules installed at PCEF by PCC-service node.

Total Rules Uninstalled

Indicates the total number of Rules installed at PCEF by PCC-service node.

Profile Name

Indicates the name of the subscriber profiles accessed by PCC-service node.

Profile Hits

Indicates the total number of hits received by specific subscriber profile at PCC-service node.

Eval-Priority Hits

This group displays the statistics of Evaluation Priority hits at PCC-service node.

Action Statistics

This group displays the statistics of actions triggered at PCC-service node.

Default EPS Bearer Auth

Indicates the total number of authorization action processed for the default EPS bearer authorization on PCC-service node.

APN AMBR Auth

Indicates the total number of authorization action processed for the APN associated Aggregate Maximum Bit Rate (AMBR) on PCC-service node.

QCI Auth

Indicates the total number of authorization action processed for the Quality Class Indicator (QCI) on PCC-service node.

Event-trigger Statistics

This group displays the statistics of event triggers at PCC-service node.

SGSN Change

Indicates the total number of "SGSN change" events triggered on PCC-service node.

QoS Change

Indicates the total number of "QoS change" events triggered on PCC-service node.

RAT Change

Indicates the total number of "RAT (Radio Access Technology) change" events triggered on PCC-service node.

TFT Change

Indicates the total number of "TFT (traffic flow template) change" events triggered on PCC-service node.

PLMN Change

Indicates the total number of "PLMN change" events triggered on PCC-service node.

Loss of flow

Indicates the total number of "Loss of Flow" events triggered on PCC-service node.

Recovery of flow

Indicates the total number of "Recovery of Flow" events triggered on PCC-service node.

IP-CAN Change

Indicates the total number of "IP-CAN Change" events triggered on PCC-service node.

Qos Change Exceeding Auth

Indicates the total number of QoS change event triggers exceeded from authorized limit on PCC-service node.

RAI Change

Indicates the total number of "RAI (Routing Area Indicator) Change" events triggered on PCC-service node.

User Location Change

Indicates the total number of "User Location Change" events triggered on PCC-service node.

Out Of Credit

Indicates the total number of "Out of Credit" events triggered on PCC-service node.

Reallocation of Credit

Indicates the total number of "Reallocation of Credit" events triggered on PCC-service node.

Revalidation timeout

Indicates the total number of timeout events triggered for "Revalidation" on PCC-service node.

IP Address Allocation

Indicates the total number of "IP Address Allocation" events triggered on PCC-service node.

IP Address Release

Indicates the total number of "IP Address Release" events triggered on PCC-service node.

Def EPS Bearer QoS Change

Indicates the total number of QoS change events triggered for Default EPS bearer on PCC-service node.

AN-GW Change

Indicates the total number of "AN-GW (Access Network Gateway)" events triggered on PCC-service node.

Successful Resource Alloc

Indicates the total number of "Successful Resource Allocation" events triggered on PCC-service node.

Resource Modification Req

Indicates the total number of resource modification request messages received by PCC-service node.

PGW Trace Control

Indicates the status of subscriber session trace control reported on PCC-service node for P-GW.

UE Timezone Change

Indicates the total number of "UE Timezone Change" events triggered on PCC-service node.

Usage Report

Indicates the total number of Usage Reports processed on PCC-service node.