show npu

This chapter describes the output of the show npu command.

show npu tm queue

Table 1. show npu tm queue Command Output Descriptions (ASR 5500 only)
Field Description

PORT

Interface port identified by Slot/Port

COS

Class of Service (COS0 to COS7) as mapped to 6-bit DSCP value via Global Configuration mode qos ip-dscp-iphb-mapping dscp command.

Current Queue Depth

(256B Buffers)

Displays queue depth globally and for each COS in units of 256-byte buffers.

show npu tm statistics

Table 2. show npu tm statistics Command Output Descriptions (ASR 5500 only)
Field Description

PORT

The interface port identified by Slot/Port.

Pri

Displays the priority as COS0 to COS7.

TX Frames

The number of transmitted frames.

WRED Frames

The number of Weighted Random Early Detection (WRED) discarded frames.

WRED Bytes

The number of WRED discarded bytes.

show npu utilization table

Table 3. show npu utilization table Command Output Descriptions for ASR 5500 and ASR 5000
Field Description

npu

Identifies NPU location as slot/CPU/NPU.

now

Displays percentage of NPU utilization occurring now.

5min

Displays percentage of NPU utilization over the past 5 minutes.

15min

Displays percentage of NPU utilization over the past 15 minutes.

Table 4. show npu utilization table Command Output Descriptions for VPC
Field Description

lcore

Identifies IFTASK core location as slot/CPU/core.

now

Displays percentage of IFTASK utilization occurring now.

5min

Displays percentage of IFTASK utilization over the past 5 minutes.

15min

Displays percentage of IFTASK utilization over the past 15 minutes.

show npumgr vpp vrcc

Table 5. show npumgr vpp vrcc Command Output Descriptions

Field

Description

VPP VRCC

Indicates whether the VRCC feature is enabled or disabled.