show mipfa

This chapter includes the show mipfa command output tables.

show mipfa full username

Table 1. show mipfa full username Command Output Descriptions
Field Description

Username

The subscriber's username.

Callid

The subscriber's call identification number (callid).

MSID

The subscriber's Mobile Station Identification number (MSID).

Num Agent Advt Sent

The total number of agent advertisement messages sent by the FA to the subscriber's mobile node.

Num Agent Solicit Rcvd

The total number of agent solicitation messages received by the FA from the subscriber's mobile node.

Home Address

The IP address assigned to the subscriber's mobile node for the duration of the session.

NAI

The subscriber's Network Access Identifier (NAI).

FA Address

The IP address of the FA that is facilitating the subscriber's Mobile IP session.

HA Address

The IP address of the Home Agent that is facilitating the subscriber's Mobile IP session.

Lifetime

The accepted lifetime interval for this session.

Remaining Lifetime

The amount of time that remains after which the session expires and is torn down.

Reverse Tunneling

Displays whether or not reverse tunneling is implemented for the subscriber's session.

Encapsulation Type

The encapsulation method used for the subscriber's session.

GRE Key

The key that uniquely identifies the subscriber session when the Generic Routing Encapsulation (GRE) protocol Encapsulation Type

IPSec Required

Indicates whether or not IPSec is required for the subscriber Mobile IP session.

IPSec Ctrl Tunnel Estab.

If IPSec is required for the session, this field indicates whether or not the control tunnel has been established.

IPSec Data Tunnel Estab.

If IPSec is required for the session, this field indicates whether or not the data tunnel has been established.

MN-AAA Removal
Shows if mn-aaa-removal-indication is enable or disabled. The possible values are:

  • enabled

  • disabled

Proxy MIP
Shows if Proxy Mobile IP is enabled or disabled for this subscriber session. Possible values are:

  • enabled

  • disabled

DMU Auth Failures

The total number of failed Dynamic MIP Key Update authentications for this subscriber session.

Send Terminal Verification
Shows if the FA is enabled to send the terminal verification NVSE in the RRQ. for this subscriber session. Possible values are:

  • enabled

  • disabled

Revocation Negotiated
Indicates whether or not MIP Registration Revocation was negotiated between the FA and the HA for this subscriber session. Possible values are :

  • NO

  • YES

Revocation I Bit Negotiated
Indicates whether or not the Revocation I bit was negotiated. Possible values are :

  • NO

  • YES

MN-HA-SPI Present

Status of dynamic MN-HA-SPI received from AAA in RRP for this subscriber session.

MN-HA-SPI

Specifies the dynamic MN-HA Security Parameter Index (SPI) number received from AAA in RRP for this subscriber session.

FA-HA-SPI Present

Status of dynamic FA-HA-SPI received from AAA in RRP for this subscriber session.

FA-HA-SPI

Specifies the dynamic FA-HA Security Parameter Index (SPI) number received from AAA in RRP for this subscriber session.

FA-HA-Key-Present

The security parameter index (SPI) key used to verify a trusted host environment and that communications are to be established between known hosts.

Checks for presence of the FA - HA key. Options are:

  • True

  • False

FA-HA-SPI

FA - HA security parameter index (SPI)

HA-RK-Key-Present

The HA root key (RK) received by the HA from the AAA in the Radius Access-Accept.

Checks for presence of HA-RK key. Options are:

  • True

  • False

Note: True indicates a WiMAX session.

HA-RK-SPI

HA - RK security parameter index (SPI)

Note: This field applies to WiMAX sessions only.

HA-RK-Lifetime

The total lifetime applied to an HA-RK.

Note: This field applies to WiMAX sessions only.

HA-RK-Remaining-Lifetime

Thew total remaining lifetime for the HA-RK.

Note: This field applies to WiMAX sessions only.

show mipfa peers fa-service

Table 2. show mipfa peers fa-service Command Output Descriptions
Field Description

Context

The name of the context where the FA service is located.

FA Service

The name of the FA service.

Peer Address

The IP address of the peer.

Current Sessions

The number of sessions currently running on the peer.

Total Sessions

The total number of current and past sessions for the peer.

IP Security

Specifies if IP security is enabled or disabled on the peer.

FA-HA Authentication

Specifies if FA-HA authentication is enabled or disabled on the peer.

HA Monitor Status

Specifies if HA monitor is enabled or disabled on the peer.

Total Peers

The total number of peers in the output of this show command.

Total Current Sessions

The total number of sessions across all peers in the output of this show command.